/*
 ******************************************************************************
 *
 * @file     UserApp.c
 * @brief    UserApp module
 *                 
 *
 * @version  1.0
 * @date     2023/03/27   15:00:40
 * @author   Alex Xu
 *
 * Copyright (c) 2013-2099,Tkplusemi Technology Co.,Ltd.
 * All Rights Reserved
 *
 * History:
 * Revision          Date           Author            Desc
 * 1.0.0            2023/03/27      Alex          build this file
 ******************************************************************************/
 /*_____ I N C L U D E S ____________________________________________________*/

#include "userapp.h"
#include "gpio.h"
#include "adc.h"
#include "hall.h"
#include "key.h"
#include "sleep.h"
#include "system.h"
#include "bat.h"
#include "sys_tim.h"
#include "charger_module.h"
#include "discharge_module.h"
#include "led.h"
#include "vox_module.h"

/******************************************************************************\
                          Macro definitions
\******************************************************************************/

/******************************************************************************\
                             Variables definitions
\******************************************************************************/
idata uint8_t bat_level_update = 0;

/******************************************************************************\
                             Functions definitions
\******************************************************************************/

/*****************************************************************************
* Function		: UserAPP
* Description	: 5ms调用周期 					
* Input			: None
* Output		: None
* Return		: None
* Note			: None
*****************************************************************************/
void UserAPP(void)
{
	if(F_sys_tim_5ms)
	{
		F_sys_tim_5ms = 0;
		
#if KEY_HALL_ENABLE
		Key_Handler();			//按键检测	
		Hall_Handler(); 		//开关盖检测	
#endif
	
#if DISCHARGE_ENABLE
		DisCharge_Handler();			//放电boost功能
#endif
	
#if CHARGER_ENABLE	
		Charger_Handler();			//充电功能
#endif		
	}
	
#ifdef LED_DISPLAY	

	if(F_sys_tim_10ms)
	{
		F_sys_tim_10ms = 0;	
		LED_Drv();
	}
	
#endif

	if(F_sys_tim_100ms)
	{
		F_sys_tim_100ms = 0;
		
#if ADC_ENABLE
		Vbat_Adc = Vbat_Value();			//获取Bat电压	
#endif	

#if BAT_VALUE
		check_bat_level();
#endif

#if VOX_ENABLE
		Vol_Det_Machine();
		Vor_Det_Machine();		
		
#ifndef BOOST_AOUT
		
		if(( OFF == Vol_Vout_Enable ) && ( OFF == Vor_Vout_Enable ))
		{	
			DisCharge_Boost_Close();
		}
#endif

#endif	
	}
	
	if( F_sys_tim_1s )
	{
		F_sys_tim_1s = 0;
		
		if (bat_level_update != bat_level)
		{
			g_188_Num = bat_level * 10;
			bat_level_update = bat_level;
		}
		printf("1s Timer Count.\r\n");
//#ifdef _DEBUG_BAT
		printf("bat_level:%d,disnum:%d.\r\n",(uint16_t)bat_level,(uint16_t)g_188_Num);
//#endif


#ifdef DISPLAY_LED_188


#if 0
		g_188_Num++;
		if(g_188_Num >= 188)
		{
			g_188_Num = 0;
		}
#endif		
#endif

#if SLEEP_ENABLE	

		/*1、唤醒后工作Ns后进入Sleep Mode,N需要大于100ms。
		  2、有VIN存在的情况下，系不会进入sleep mode。
		*/

        if( Decnt_SleepDelay > 0 )    /*能否在数字中实现此功能？*/
        {            							
            Decnt_SleepDelay--;

			/*倒数进Sleep Mode过程中出现了KEY\HALL\Loadon\IOFF中断，则重新计时。*/
			if( Enter_Sleep_Cnt_Restart_Flag )
			{
				Enter_Sleep_Cnt_Restart_Flag = 0;
				Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
			}
#if KEY_HALL_ENABLE			
			/*todo*/
			if( (Event_key == KEY_EVENT_LL_8S) && Decnt_SleepDelay == 0 )    //8s按键后重新倒数计时，计时到0，系统Software Reset。在倒数过程中出现中断，则重新计时。
			{
				RSTCON = 0xAC;
				SRST = 0x01;			
			}
#endif
			
#ifdef _DEBUG_MAIN
           // printf("sleep decnt:%d,STA0:0x%x,STA1:0x%x,STA2:0x%x,STA3:0x%x,STA4:0x%x\r\n", (uint16_t)Decnt_SleepDelay,(uint16_t)CHIP_STA0,(uint16_t)CHIP_STA1,(uint16_t)CHIP_STA2,(uint16_t)CHIP_STA3,(uint16_t)CHIP_STA4);
			printf("sleep decnt:%d,STA0:0x%x,STA1:0x%x,STA2:0x%x,STA4:0x%x\r\n", (uint16_t)Decnt_SleepDelay,(uint16_t)CHIP_STA0,(uint16_t)CHIP_STA1,(uint16_t)CHIP_STA2,(uint16_t)CHIP_STA4);
#endif					
			return;
        }
		
	
		
		if( Check_Require_Sleep() )
		{			
			/* 唤醒中断使能设置 */
			
			SFRADDR = WKUP_EN0;
			SFRDATA = 0xE6;             //wake0 up enable.

			SFRADDR = WKUP_EN3;
			SFRDATA = 0xFF; 			//wake3 up enable.bat low,Timer,VOX loadin\loadon wake up.
			
			/* Enter Sleep */
#ifdef DISPLAY_LED_188

			Set_AllLed_Down();

#endif
			/* InSleep Handler */		//Disable All IRQ		
#if UART0_ENABLE			
			ES0 = 0;		//UART0 IRQ Disable
#endif
			EX4 = 0;
			EX2 = 0;
			ET0 = 0;		//timer0 IRQ Disable
#if TIMER1_ENABLE			
			ET1 = 0;		//timer1 IRQ Disable
#endif			
			PCON |= 0x02;						//Enter StandbyMode, Only int0 or int1 can wake up system
			
			/* OutSleep Handler */		//Enable IRQ
#if UART0_ENABLE			
			ES0 = 1;		//UART0 IRQ 
#endif
			EX4 = 1;
			EX2 = 1;
			ET0 = 1;		//timer0 IRQ
#if TIMER1_ENABLE			
			ET1 = 1;		//timer1 IRQ
#endif	

			Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
		}
		else
		{
			Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
		}
#endif
	}
}