/*
 ******************************************************************************
 *
 * @file     UserApp.c
 * @brief    UserApp module
 *                 
 *
 * @version  1.0
 * @date     2023/03/27   15:00:40
 * @author   Alex Xu
 *
 * Copyright (c) 2013-2099,Tkplusemi Technology Co.,Ltd.
 * All Rights Reserved
 *
 * History:
 * Revision          Date           Author            Desc
 * 1.0.0            2023/03/27      Alex          build this file
 ******************************************************************************/
 /*_____ I N C L U D E S ____________________________________________________*/

#include "userapp.h"
#include "gpio.h"
#include "adc.h"
#include "hall.h"
#include "key.h"
#include "sleep.h"
#include "system.h"
#include "bat.h"
#include "sys_tim.h"
#include "charger_module.h"
#include "discharge_module.h"
#include "led.h"
#include "vox_module.h"

/******************************************************************************\
                          Macro definitions
\******************************************************************************/

/******************************************************************************\
                             Variables definitions
\******************************************************************************/

/******************************************************************************\
                             Functions definitions
\******************************************************************************/

/*
*******************************************************************************
*			 void System_Drivers_Machine(void)
*
* Description : 系统驱动相关程序处理。 (最小5ms调用周期)
*
* Arguments	 : NONE

* Returns	 : NONE

* Notes		 : NONE
*
*******************************************************************************
*/ 
#if 0
void System_Drivers_Machine(void)
{
#if KEY_HALL_ENABLE
	Key_Handler();			//按键检测

	Hall_Handler();			//开关盖检测	
#endif

#if DISCHARGE_ENABLE
	DisCharge_Handler();			//放电boost功能
#endif

#if CHARGER_ENABLE	
	Charger_Handler();			//充电功能
#endif
}
#endif
/*****************************************************************************
* Function		: UserAPP
* Description	: 5ms调用周期 					
* Input			: None
* Output		: None
* Return		: None
* Note			: None
*****************************************************************************/
void UserAPP(void)
{
	if(F_sys_tim_5ms)
	{
		F_sys_tim_5ms = 0;
		
		{
#if KEY_HALL_ENABLE
			Key_Handler();			//按键检测
		
			Hall_Handler(); 		//开关盖检测	
#endif
		
#if DISCHARGE_ENABLE
			DisCharge_Handler();			//放电boost功能
#endif
		
#if CHARGER_ENABLE	
			Charger_Handler();			//充电功能
#endif
		}

	}
	
	if(F_sys_tim_10ms)
	{
		F_sys_tim_10ms = 0;	
#ifdef LED_DISPLAY
		LED_Drv();
#endif
	}

	if(F_sys_tim_100ms)
	{
		F_sys_tim_100ms = 0;

#if VOX_ENABLE
		Vol_Det_Machine();
		Vor_Det_Machine();
#endif	
	}
		
	if( F_sys_tim_1s )
	{
		F_sys_tim_1s = 0;
		
		/*1、唤醒后工作N s后进入Sleep Mode,N需要大于100ms。
		  2、有VIN存在的情况下，系不会进入sleep mode。
		*/
		if( Check_Require_Sleep() )
		{
	        if( Decnt_SleepDelay > 0 )    /*能否在数字中实现此功能？*/
	        {            							
#ifdef _DEBUG_MAIN
	            printf("sleep decounter:%d,CHIP_STA1:0x%x\r\n", (uint16_t)Decnt_SleepDelay,(uint16_t)CHIP_STA1);
#endif	
	            Decnt_SleepDelay--;

				/*倒数进Sleep Mode过程中出现了中断，则重新计时。*/
				if( Enter_Sleep_Cnt_Restart_Flag )
				{
					Enter_Sleep_Cnt_Restart_Flag = 0;
					Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
				}
		
				if( Decnt_SleepDelay == 0 )
				{
#ifdef _DEBUG_MAIN					
					printf("Enter Standby Mode!\r\n");
#endif						
					/*清标志位*/
					Protect_Type_Flg = 0;					
					gIrq_Event_Type = 0;								
				}
				
				return;
	        }
			
			//WakeUp_Init_Set();	    		//唤醒中断使能设置
			
			SFRADDR = WKUP_EN0;
			SFRDATA = 0xE4;             //wake0 up enable.

			SFRADDR = WKUP_EN1;
			SFRDATA = 0xFF; 			 //wake1 up enable.

			SFRADDR = WKUP_EN3;
			SFRDATA = 0xFF; 			//wake3 up enable.bat low,Timer,VOX loadin\loadon wake up.
			
			//Enter_Sleep(); 
			
			//InSleep_Handler();		//Disable All IRQ
			{	
				ES0 = 0;		//UART0 IRQ Disable
				EX4 = 0;
				EX3 = 0;
				EX2 = 0;
				EX7 = 0;
				ET0 = 0;		//timer0 IRQ Disable
				ET1 = 0;		//timer1 IRQ Disable
				
				SFRADDR = ADC_CTL0;	
			  SFRDATA &= ~0x80;			//ADC Disable.	
			}	
			
			PCON |= 0x02;						//Enter StandbyMode, Only int0 or int1 can wake up system
	
		///	OutSleep_Handler();		//Enable IRQ
			{	
				ES0 = 1;		//UART0 IRQ 
				EX4 = 1;
				EX3 = 1;
				EX2 = 1;
				EX7 = 1;
				ET0 = 1;		//timer0 IRQ
				ET1 = 1;		//timer1 IRQ
				
				SFRADDR = ADC_CTL0;	
			    SFRDATA |= 0x80;			//ADC enable.
			}
		
			Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
		}
		else
		{
			Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
		}
#if 0
		Vbat_Value();	//获取Bat电压,用于ADC测试
#endif
	}
}