1597 lines
39 KiB
C
1597 lines
39 KiB
C
/*
|
||
******************************************************************************
|
||
*
|
||
* @file VOX_Module.c
|
||
* @brief VOL/R module
|
||
* @ic sy8835
|
||
*
|
||
* @version 1.0
|
||
* @date 2024/11/01 09:59:40
|
||
* @author Alex Xu
|
||
*
|
||
* Copyright (c) 2013-2099,Tkplusemi Technology Co.,Ltd.
|
||
* All Rights Reserved
|
||
*
|
||
* History:
|
||
* Revision Date Author Desc
|
||
* 1.0.0 2024/11/01 Alex build this file
|
||
******************************************************************************
|
||
*/
|
||
#include "vox_module.h"
|
||
#include "led.h"
|
||
#include "system.h"
|
||
#include "discharge_module.h"
|
||
#include "sleep.h"
|
||
#include "bat.h"
|
||
#include "hall.h"
|
||
#include "key.h"
|
||
#include "sys_tim.h"
|
||
#include "sys_tim.h"
|
||
#include "adc.h"
|
||
#include "userapp.h"
|
||
|
||
bit Vox_Vout_Enable = OFF; //Vox功率输出标志位
|
||
bit Earphone_Chg_Flag = 0; //耳机出入盒标志位
|
||
bit Boost_Open_Flag = 0;
|
||
uint8_t Vox_Type = 0xFF;
|
||
bit Vox_Output_Short_Flag = 0;
|
||
|
||
#if VOX_ENABLE
|
||
|
||
/******************************************************************************\
|
||
Macro definitions
|
||
\******************************************************************************/
|
||
/*100ms调用周期*/
|
||
#define VOX_OUTPUT_SHORT_CNT 2
|
||
#define VOX_LOW_BAT_CNT 25 //关盖前，盒子低电保护，Vox 5V持续2.5s
|
||
#define VOX_VOUT_5V_LEAST_CNT 50
|
||
|
||
#define VOX_VOUT_5V_DEBOUNCE 5
|
||
#define VOX_VOUT_0V_DEBOUNCE 5
|
||
|
||
#define VOX_ADT_HOLD_CNT 3
|
||
#define Vox_TX_Pattern_Cnt 3
|
||
|
||
#define VOX_VOLTAGE_HOLD_CNT 3
|
||
|
||
#define BOOST_VOUT_MAX 2 //跟随充Boost输出电压上限值：0:4.6V,1:4.7V,2:4.8V,3:5.05V.
|
||
|
||
#define Vox_TX_Pattern_Tim 11
|
||
|
||
#define Vox_TX_Interval 2 //Vox定时发送指令时间间隔
|
||
#define Vox_TX_Interval_2 3
|
||
|
||
#define VOX_IOFF_HOLD_CNT 50
|
||
|
||
#define VOX_FOLLOW_CHG_CNT 10
|
||
|
||
#define VOX_CLOSE_HOLD_CNT 50 //关盖发码前保持时间
|
||
|
||
#if VOX_FOLLOW_CHG
|
||
|
||
#define VOX_FOLLOW_CHG_INIT_CNT 3
|
||
|
||
#define VOX_FOLLOW_CHG_NOWCURCHK_CNT 5
|
||
|
||
#define VOX_FOLLOW_CHG_VOLTAGE_ADJUST_CNT 2 //PMID调压周期
|
||
|
||
#define VOX_FOLLOW_CHG_PMID_UP_CNT 20 //PMID上升调节周期（2s）
|
||
|
||
#define VOX_FOLLOW_CHG_PMID_UP_STEPS 2 //PMID上升调节档位数。
|
||
|
||
#define VOX_FOLLOW_CHG_PMID_DOWN_STEPS 2 //PMID下降调节档位数。
|
||
|
||
#define VPMID_MAX_THD 0x3C
|
||
|
||
#define VPMID_MIN_THD 0x00
|
||
|
||
#define VOX_CV_TC_CURRENT 20 //耳机充电处于CV/TC阶段的电流值，单位mA。
|
||
|
||
#endif
|
||
/******************************************************************************\
|
||
Variables definitions
|
||
\******************************************************************************/
|
||
#if VOX_FOLLOW_CHG
|
||
|
||
xdata uint16_t Vox_Follow_Chg_Debounce = 0;
|
||
|
||
g_Vox_Fllow_Chg_Cfg xdata Vox_Fllow_Chg;
|
||
|
||
e_Vox_Follow_Chg_Sta Follow_Chg_Sta;
|
||
|
||
#endif
|
||
|
||
#ifdef VOX_RX
|
||
|
||
xdata uint8_t Vox_Get_Vbat_Flag[2] = {0}; //耳机配对状态，VOL:低4bit；VOR:高4bit。0是无效，1是正在配对，2是配对成功，3不处理，保持当前状态。
|
||
xdata uint8_t Vox_Get_BES_Addr_Flag[2] = {0};
|
||
//idata uint8_t BES_Addr[6] = {0}; //蓝牙耳机地址，Vox_Bes_Addr[0][6]：VOL；Vox_Bes_Addr[1][6]：VOR
|
||
|
||
#endif
|
||
|
||
xdata uint8_t Earphone_Vbat[2] = 0; //对耳电量
|
||
xdata uint8_t Vox_Online_State[2] = {0}; //耳机在线标志位
|
||
|
||
#define KEY_TWS_PAIR_TIMER 2
|
||
#define KEY_TWS_PAIR_CNT 6
|
||
|
||
#define KEY_TWS_PAIR_CLEAR_CNT 30
|
||
|
||
/******************************************************************************\
|
||
Functions definitions
|
||
\******************************************************************************/
|
||
#if 0
|
||
/*
|
||
*******************************************************************************
|
||
* uint8_t VOL_EN_Type(VOL_Enable_Type_e VOL_Enable_Type)
|
||
*
|
||
* Description : VOL Open(EN_VO)
|
||
* 使能信号优先级
|
||
* EN_TRAN EN_COM EN_VO EN_ADT PD1K VOX_STATE
|
||
* 1 X X X X TRAN
|
||
* 0 1 X X X COMM
|
||
* 0 0 1 X X 5V
|
||
* 0 0 0 1 X LOAD DET
|
||
* 0 0 0 0 1 PD1K
|
||
* 0 0 0 0 0 HIZ
|
||
|
||
* Arguments :
|
||
|
||
* Returns :
|
||
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
void VOL_EN_Type(VOX_Enable_Mode_e VOL_Enable_Mode)
|
||
{
|
||
uint8_t Bst_VOX_Comm_EN = 0;
|
||
uint8_t VOX_Confg = 0;
|
||
|
||
Bst_VOX_Comm_EN = I2cSfr_Read( BST_COMM_EN );
|
||
VOX_Confg = I2cSfr_Read( VOX_CFG );
|
||
|
||
switch(VOL_Enable_Mode)
|
||
{
|
||
case VOX_TRANS_Mode: //关闭自动识别负载的上拉电阻。
|
||
|
||
|
||
break;
|
||
|
||
case VOX_COMM_Mode_Uart:
|
||
|
||
VOX_Confg |= VOX_CFG_Comx_Rup_10K |VOX_CFG_Vox_Rup_10K | VOX_CFG_Vox_Vup_1_8V;
|
||
|
||
Bst_VOX_Comm_EN |= BST_COMM_EN_Vol_Comm_En;
|
||
|
||
break;
|
||
|
||
case VOX_COMM_Mode_Reg:
|
||
|
||
|
||
break;
|
||
|
||
case VOX_VOUT_Mode: //Vox的通讯功能优先级比Vout 5V高。
|
||
|
||
Bst_VOX_Comm_EN |= BST_COMM_EN_Vol_En;
|
||
|
||
Bst_VOX_Comm_EN &= ~BST_COMM_EN_Vol_Comm_En;
|
||
|
||
break;
|
||
|
||
case VOX_ADT_Mode:
|
||
|
||
VOX_Confg &= ~VOX_CFG_Vox_DisAdt; //开启ADT模式
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vol_Comm_En | BST_COMM_EN_Vol_En );
|
||
|
||
break;
|
||
|
||
case VOX_PD1K_Mode:
|
||
|
||
VOX_Confg |= VOX_CFG_Vox_DisAdt;
|
||
|
||
VOX_Confg &= ~VOX_CFG_Vox_Floating; //Vox通过1K电阻下拉到GND
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vol_Comm_En | BST_COMM_EN_Vol_En );
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
I2cSfr_Write( BST_COMM_EN, Bst_VOX_Comm_EN );
|
||
I2cSfr_Write( VOX_CFG, VOX_Confg );
|
||
}
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* void VOR_EN_Type(VOR_Enable_Type_e VOR_Enable_Type)
|
||
*
|
||
* Description : VOL Open(EN_VO)
|
||
* 使能信号优先级
|
||
* EN_TRAN EN_COM EN_VO EN_ADT PD1K VOX_STATE
|
||
* 1 X X X X TRAN
|
||
* 0 1 X X X COMM
|
||
* 0 0 1 X X 5V
|
||
* 0 0 0 1 X LOAD DET
|
||
* 0 0 0 0 1 PD1K
|
||
* 0 0 0 0 0 HIZ
|
||
|
||
* Arguments :
|
||
|
||
* Returns :
|
||
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
void VOR_EN_Type(VOX_Enable_Mode_e VOR_Enable_Mode)
|
||
{
|
||
uint8_t Bst_VOX_Comm_EN = 0;
|
||
uint8_t VOX_Confg = 0;
|
||
|
||
Bst_VOX_Comm_EN = I2cSfr_Read( BST_COMM_EN );
|
||
VOX_Confg = I2cSfr_Read( VOX_CFG );
|
||
|
||
switch(VOR_Enable_Mode)
|
||
{
|
||
case VOX_TRANS_Mode: //关闭自动识别负载的上拉电阻。
|
||
|
||
|
||
break;
|
||
|
||
case VOX_COMM_Mode_Uart:
|
||
|
||
VOX_Confg |= VOX_CFG_Comx_Rup_10K |VOX_CFG_Vox_Rup_10K | VOX_CFG_Vox_Vup_1_8V;
|
||
|
||
Bst_VOX_Comm_EN |= BST_COMM_EN_Vor_Comm_En;
|
||
|
||
break;
|
||
|
||
case VOX_COMM_Mode_Reg:
|
||
|
||
|
||
break;
|
||
|
||
case VOX_VOUT_Mode: //Vox的通讯功能优先级比Vout 5V高。
|
||
|
||
Bst_VOX_Comm_EN |= BST_COMM_EN_Vor_En;
|
||
|
||
Bst_VOX_Comm_EN &= ~BST_COMM_EN_Vor_Comm_En;
|
||
|
||
break;
|
||
|
||
case VOX_ADT_Mode:
|
||
|
||
VOX_Confg &= ~VOX_CFG_Vox_DisAdt; //开启ADT模式
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vor_Comm_En | BST_COMM_EN_Vor_En );
|
||
|
||
break;
|
||
|
||
case VOX_PD1K_Mode:
|
||
|
||
VOX_Confg |= VOX_CFG_Vox_DisAdt;
|
||
|
||
VOX_Confg &= ~VOX_CFG_Vox_Floating; //Vox通过1K电阻下拉到GND
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vor_Comm_En | BST_COMM_EN_Vor_En );
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
I2cSfr_Write( BST_COMM_EN, Bst_VOX_Comm_EN );
|
||
I2cSfr_Write( VOX_CFG, VOX_Confg );
|
||
}
|
||
|
||
#else
|
||
/*
|
||
*******************************************************************************
|
||
* void VOX_EN_Type(VOR_Enable_Type_e VOR_Enable_Type)
|
||
*
|
||
* Description : VOL Open(EN_VO)
|
||
* 使能信号优先级
|
||
* EN_COM EN_VO EN_ADT PD1K VOX_STATE
|
||
* 1 X X X COMM
|
||
* 0 1 X X 5V
|
||
* 0 0 1 X Auto DET
|
||
* 0 0 0 1 PD1K
|
||
|
||
* Arguments :
|
||
|
||
* Returns :
|
||
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
void VOX_EN_Type(VOX_Enable_Mode_e VOX_Enable_Mode)
|
||
{
|
||
uint8_t Bst_VOX_Comm_EN = 0;
|
||
uint8_t VOX_Confg = 0;
|
||
|
||
Bst_VOX_Comm_EN = I2cSfr_Read( BST_COMM_EN );
|
||
|
||
VOX_Confg = I2cSfr_Read( VOX_CFG );
|
||
|
||
switch(VOX_Enable_Mode)
|
||
{
|
||
case VOX_TRANS_Mode: //关闭自动识别负载的上拉电阻。
|
||
|
||
|
||
break;
|
||
|
||
case VOX_COMM_Mode_Uart:
|
||
|
||
VOX_Confg |= VOX_CFG_Comx_Rup_2K |VOX_CFG_Vox_Rup_2K | VOX_CFG_Vox_Vup_VOXS;
|
||
|
||
Bst_VOX_Comm_EN |= BST_COMM_EN_Gate_Ctrl | ( BST_COMM_EN_Vor_Comm_En | BST_COMM_EN_Vol_Comm_En );
|
||
|
||
break;
|
||
|
||
case VOX_COMM_Mode_Reg:
|
||
|
||
|
||
break;
|
||
|
||
case VOX_VOUT_Mode: //Vox的通讯功能优先级比Vout 5V高。
|
||
|
||
Bst_VOX_Comm_EN |= ( BST_COMM_EN_Vor_En | BST_COMM_EN_Vol_En );
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vor_Comm_En | BST_COMM_EN_Vol_Comm_En );
|
||
|
||
break;
|
||
|
||
case VOX_ADT_Mode:
|
||
|
||
VOX_Confg &= ~VOX_CFG_Vox_DisAdt; //开启ADT模式
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vor_Comm_En | BST_COMM_EN_Vor_En | BST_COMM_EN_Vol_Comm_En | BST_COMM_EN_Vol_En );
|
||
|
||
break;
|
||
|
||
case VOX_PD1K_Mode:
|
||
|
||
VOX_Confg |= VOX_CFG_Vox_DisAdt;
|
||
|
||
VOX_Confg &= ~VOX_CFG_Vox_Floating; //Vox通过1K电阻下拉到GND
|
||
|
||
Bst_VOX_Comm_EN &= ~( BST_COMM_EN_Vor_Comm_En | BST_COMM_EN_Vor_En | BST_COMM_EN_Vol_Comm_En | BST_COMM_EN_Vol_En );
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
I2cSfr_Write( BST_COMM_EN, Bst_VOX_Comm_EN );
|
||
|
||
I2cSfr_Write( VOX_CFG, VOX_Confg );
|
||
}
|
||
|
||
|
||
|
||
#endif
|
||
/*
|
||
*******************************************************************************
|
||
* void Vox_Det_Machine(void)
|
||
*
|
||
* Description : Vox Detect:耳机识别。 (100ms调用周期)
|
||
*
|
||
* Arguments : NONE
|
||
|
||
* Returns : NONE
|
||
|
||
* Notes : NONE
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
/*
|
||
1、关盖开启Boost denounce一段时间（ms级延时）后开启Vox 5v；显示灯效。
|
||
2、开盖开启Boost denounce一段时间（ms级延时）后开启Vox 5v至少500ms用于唤醒耳机；后发送开盖指令，持续10s，间隔250-300ms。
|
||
3、发送开盖指令间隔（250-300ms）期间，Vox转入ADT模式，检测都Loadon状态需要有灯效。
|
||
4、两只耳机电池都充满或仓低电，则发送关机指令。
|
||
*/
|
||
|
||
void Vox_Det_Machine(void)
|
||
{
|
||
static bit Get_CHIP_STA1_Flag1;
|
||
|
||
static bit Cover_Close_Flag;
|
||
|
||
static bit Cover_Open_Flag;
|
||
|
||
static bit TX_Cmd_Flag;
|
||
|
||
static bit Cover_Open_5V_Flag;
|
||
|
||
static bit Bat_Low_Pro_Flag;
|
||
|
||
static bit Vox_Chg_Full_Flag;
|
||
|
||
static bit Vox_Getinto_Sleep_Flag;
|
||
|
||
static uint8_t CHIP_STA1_BK;
|
||
static uint8_t Vox_Voltage_Hold_Timer;
|
||
|
||
static uint8_t Vox_TX_Timer;
|
||
|
||
static bit Vox_Chn_Select;
|
||
|
||
static uint8_t Vox_Output_Debounce;
|
||
|
||
/*Vox 过流保护，两只耳机都每隔200ms打嗝一次*/
|
||
if( pmu_Info.pmu_Fault_STA2 & ( Fault_Sta2_VorOCP | Fault_Sta2_VolOCP ) )
|
||
{
|
||
Vox_Output_Short_Flag = 1;
|
||
|
||
return;
|
||
}
|
||
|
||
Vox_Output_Short_Flag = 0;
|
||
|
||
if( gBoost_Prepared_Flag )
|
||
{
|
||
if( CoverEvent_Flg ) //Hall事件触发。
|
||
{
|
||
if( !Boost_Open_Flag )
|
||
{
|
||
Set_PMU_Boost_Vout(BOOST_VPMID_5_2V); //开关盖Boost输出5.2V，保证耳机一定能被唤醒。
|
||
|
||
Set_PMU_Boost(ON); //Boost Enable；异常时由硬件主动关闭。开启Boost，开启Vox 5v会在开启Boost之后（100ms延时）。
|
||
|
||
Boost_Open_Flag = 1;
|
||
|
||
return;
|
||
}
|
||
|
||
VOX_EN_Type(VOX_VOUT_Mode); //VOX Enable 5V
|
||
|
||
Vox_Output_Debounce = 0;
|
||
|
||
Vox_Voltage_Hold_Timer = 0; //关盖清0，开盖使用
|
||
|
||
Vox_TX_Timer = 0;
|
||
|
||
Get_CHIP_STA1_Flag1 = 0;
|
||
|
||
if( CoverStatus == CLOSE ) //1、关盖关闭COM_CTRL；显示灯效。（无需查询Loadon、IOFF状态，无论耳机是否在仓，Vox 5V输出。）
|
||
{
|
||
Earphone_Chg_Flag = 0; //关盖取消耳机入盒灯效，显示关盖灯效。
|
||
|
||
Cover_Close_Flag = 1;
|
||
|
||
Cover_Open_Flag = 0;
|
||
|
||
Vox_Chg_Full_Flag = 0;
|
||
|
||
Vox_Getinto_Sleep_Flag = 0;
|
||
|
||
Vox_Chn_Select = 0;
|
||
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 0x00;
|
||
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 0x00;
|
||
|
||
Vox_Vout_Enable = ON;
|
||
|
||
Wkup_Earphone_Flag = 0;
|
||
|
||
#if VOX_FOLLOW_CHG
|
||
Vox_Fllow_Chg.Vox_Follow_Start = OFF;
|
||
|
||
Vox_Fllow_Chg.Vox_Follow_Stop = OFF;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_InitSta;
|
||
#endif
|
||
#ifdef _DEBUG_VOX
|
||
printf("Box Close.\r\n");
|
||
#endif
|
||
}
|
||
else //2、开盖处理：5v 500ms 转0V 500ms，后转ADT模式。
|
||
{
|
||
Cover_Close_Flag = 0;
|
||
|
||
Cover_Open_Flag = 1;
|
||
|
||
Cover_Open_5V_Flag = 0;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Box Open.\r\n");
|
||
#endif
|
||
}
|
||
|
||
CoverEvent_Flg = 0;
|
||
}
|
||
|
||
|
||
/* 发送开盖指令*/
|
||
if( Cover_Open_Flag ) /*开盖后，5V持续N00ms后0V持续N00ms，保证耳机能被唤醒；之后发开盖码。*/
|
||
{
|
||
if( Vox_Voltage_Hold_Timer < VOX_VOUT_5V_DEBOUNCE ) //开盖后5V N00ms。
|
||
{
|
||
Vox_Voltage_Hold_Timer++;
|
||
|
||
return;
|
||
}
|
||
|
||
if( Vox_TX_Timer < VOX_VOUT_0V_DEBOUNCE ) //转0V N00ms
|
||
{
|
||
VOX_EN_Type(VOX_PD1K_Mode);
|
||
|
||
Vox_TX_Timer++;
|
||
}
|
||
else
|
||
{
|
||
if( !Get_CHIP_STA1_Flag1 )
|
||
{
|
||
if( Vox_Output_Debounce <= Vox_TX_Pattern_Tim )
|
||
{
|
||
if( ( Vox_Output_Debounce % Vox_TX_Interval_2 ) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_OPEN_BOX,VOL_CHAN); //左耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
else
|
||
if( ( Vox_Output_Debounce % Vox_TX_Interval ) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_OPEN_BOX,VOR_CHAN); //右耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
|
||
Vox_Output_Debounce++;
|
||
}
|
||
else
|
||
{
|
||
VOX_EN_Type(VOX_ADT_Mode);
|
||
|
||
Vox_Output_Debounce = 0;
|
||
|
||
Get_CHIP_STA1_Flag1 = 1;
|
||
|
||
TX_Cmd_Flag = 1;
|
||
|
||
Boost_Open_Flag = 0;
|
||
|
||
Vox_Vout_Enable = OFF;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Open Box CMD TX Over.\r\n");
|
||
#endif
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if( TX_Cmd_Flag )
|
||
{
|
||
TX_Cmd_Flag = 0;
|
||
|
||
CHIP_STA1_BK = pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn );
|
||
}
|
||
else
|
||
{
|
||
/*耳机出入盒判断*/
|
||
if( CHIP_STA1_BK != ( pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn ) ) ) //查询耳机loadon状态，loadon状态改变，则说明有耳机出入盒。
|
||
{
|
||
if( pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn ) )
|
||
{
|
||
Earphone_Chg_Flag = 1;
|
||
#ifdef LED_DISPLAY
|
||
LED_On_Flag = 1;
|
||
#endif
|
||
#ifdef _DEBUG_VOX
|
||
printf("Open Box And Earphone GetIn.\r\n");
|
||
#endif
|
||
|
||
}
|
||
|
||
CHIP_STA1_BK = ( pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn ) );
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
if( Cover_Close_Flag )
|
||
{
|
||
if( Wkup_Earphone_Flag ) //保护、断充电后，VOX需自动升压唤醒耳机。
|
||
{
|
||
if( !Boost_Open_Flag )
|
||
{
|
||
Set_PMU_Boost(ON); //Boost Enable；异常时由硬件主动关闭。开启Boost，开启Vox 5v会在开启Boost之后（100ms延时）。
|
||
|
||
Boost_Open_Flag = 1;
|
||
|
||
Vox_Vout_Enable = ON;
|
||
#if VOX_FOLLOW_CHG
|
||
Vox_Fllow_Chg.Vox_Follow_Start = OFF;
|
||
|
||
Vox_Fllow_Chg.Vox_Follow_Stop = OFF;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_InitSta;
|
||
#endif
|
||
Vox_TX_Timer = 0;
|
||
|
||
Vox_Voltage_Hold_Timer = 0;
|
||
|
||
Vox_Output_Debounce = 0;
|
||
|
||
Vox_Chg_Full_Flag = 0;
|
||
|
||
return;
|
||
}
|
||
|
||
VOX_EN_Type(VOX_VOUT_Mode); //VOX Enable 5V
|
||
#ifdef _DEBUG_VOX
|
||
printf("Close Box And Force Voltage Up.\r\n");
|
||
#endif
|
||
|
||
Wkup_Earphone_Flag = 0;
|
||
}
|
||
else
|
||
{
|
||
if( Vox_Voltage_Hold_Timer <= VOX_VOLTAGE_HOLD_CNT ) //关盖Boost VPMID保持时间。
|
||
{
|
||
Vox_Voltage_Hold_Timer++;
|
||
|
||
return;
|
||
}
|
||
|
||
if( Vox_TX_Timer <= Vox_TX_Pattern_Tim ) //发送关盖指令。
|
||
{
|
||
if( (Vox_TX_Timer % Vox_TX_Interval_2) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_CLOSE_BOX,VOL_CHAN); //左耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
else
|
||
if( (Vox_TX_Timer % Vox_TX_Interval) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_CLOSE_BOX,VOR_CHAN); //右耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
|
||
Vox_TX_Timer++;
|
||
|
||
return;
|
||
}
|
||
}
|
||
|
||
if( Vox_Output_Debounce <= VOX_CLOSE_HOLD_CNT ) //关盖后5s发送获取电量命令。
|
||
{
|
||
if( (Vox_Output_Debounce % Vox_TX_Interval_2) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_CLOSE_WIN_GET_VBAT,VOL_CHAN); //左耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
else
|
||
if( (Vox_Output_Debounce % Vox_TX_Interval) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_CLOSE_WIN_GET_VBAT,VOR_CHAN); //右耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
|
||
Vox_Output_Debounce++;
|
||
|
||
return;
|
||
}
|
||
|
||
#if VOX_FOLLOW_CHG
|
||
|
||
if ( Vox_Fllow_Chg.Vox_Follow_Stop == OFF )
|
||
{
|
||
Vox_Follow_Chg( &Vox_Fllow_Chg ); //跟随充处理。
|
||
}
|
||
else
|
||
#endif
|
||
{
|
||
if( !Vox_Chg_Full_Flag )
|
||
{
|
||
if( ( (pmu_Info.pmu_VOX_STA & ( VOR_Ioff | VOL_Ioff ) ) == ( VOR_Ioff | VOL_Ioff ) )|| !(pmu_Info.pmu_VOX_STA & ( VOL_LoadOn | VOR_LoadOn ) ) || F_batlevel_low ) //耳机充满、VOX无负载、盒子低电，则关闭Vout输出通路，关闭Boost。
|
||
{
|
||
if( Vox_Voltage_Hold_Timer < VOX_VOUT_5V_LEAST_CNT ) //重载转轻载延时5s后关闭Boost输出。
|
||
{
|
||
Vox_Voltage_Hold_Timer++;
|
||
|
||
return;
|
||
}
|
||
#ifdef _DEBUG_VOX
|
||
printf("VOX CHG Full.\r\n");
|
||
#endif
|
||
|
||
Vox_Chg_Full_Flag = 1;
|
||
|
||
Boost_Open_Flag = 0;
|
||
|
||
VOX_EN_Type(VOX_ADT_Mode); //VOX Enable ADT
|
||
}
|
||
}
|
||
else
|
||
{
|
||
|
||
if( Vox_Output_Debounce <= Vox_TX_Pattern_Tim )
|
||
{
|
||
if( (Vox_Output_Debounce % Vox_TX_Interval_2) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_PWROFF,VOL_CHAN); //左耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
else
|
||
if( (Vox_Output_Debounce % Vox_TX_Interval) == 0 ) //200ms发送一次
|
||
{
|
||
#ifdef VOX_TX
|
||
HandleTxCommand(VHOUSE_CMD_PWROFF,VOR_CHAN); //右耳发开盖指令，区分耳机通道。
|
||
#endif
|
||
}
|
||
|
||
Vox_Output_Debounce++;
|
||
}
|
||
else
|
||
{
|
||
if( !Vox_Getinto_Sleep_Flag )
|
||
{
|
||
Vox_Getinto_Sleep_Flag = 1;
|
||
|
||
VOX_EN_Type(VOX_ADT_Mode);
|
||
|
||
Vox_Vout_Enable = OFF;
|
||
#ifdef _DEBUG_VOX
|
||
printf("VOX Get Into Sleep.\r\n");
|
||
#endif
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
Bat_Low_Pro_Flag = 0;
|
||
}
|
||
else
|
||
{
|
||
if( !Bat_Low_Pro_Flag ) //低电保护后，VOX开启ADT模式。判断耳机出入盒，并显示相应的灯效。
|
||
{
|
||
Bat_Low_Pro_Flag = 1;
|
||
|
||
VOX_EN_Type(VOX_ADT_Mode);
|
||
|
||
Vox_Vout_Enable = OFF;
|
||
|
||
CHIP_STA1_BK = pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn );
|
||
|
||
return;
|
||
}
|
||
|
||
|
||
/*耳机出入盒判断*/
|
||
if( CHIP_STA1_BK != ( pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn ) ) ) //查询耳机loadon状态，loadon状态改变，则说明有耳机出入盒。
|
||
{
|
||
if( pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn ) )
|
||
{
|
||
Earphone_Chg_Flag = 1;
|
||
#ifdef LED_DISPLAY
|
||
LED_On_Flag = 1;
|
||
#endif
|
||
}
|
||
|
||
CHIP_STA1_BK = ( pmu_Info.pmu_VOX_STA & ( VOR_LoadOn | VOL_LoadOn ) );
|
||
}
|
||
}
|
||
}
|
||
|
||
#if VOX_FOLLOW_CHG
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* void Vox_Follow_Chg( g_Vox_Fllow_Chg_Cfg *g_Vox_Fllow_Chg )
|
||
*
|
||
* Description : Vox 跟随充处理函数。 (40ms调用周期)
|
||
*
|
||
* Arguments : NONE
|
||
|
||
* Returns : NONE
|
||
|
||
* Notes : NONE
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
void Vox_Follow_Chg( g_Vox_Fllow_Chg_Cfg *n_Vox_Fllow_Chg )
|
||
{
|
||
static bit nVpmid_Value_Setting;
|
||
|
||
switch (Follow_Chg_Sta)
|
||
{
|
||
case Vox_Follow_Chg_InitSta: //STA0:PMID=5.2V可以保证耳机一定能进入充电状态，并持续一段时间保证耳机能开始抽电。
|
||
|
||
if( (n_Vox_Fllow_Chg->Vox_Follow_Stop == OFF) ) //启动跟随充
|
||
{
|
||
if( Vox_Follow_Chg_Debounce <= VOX_FOLLOW_CHG_INIT_CNT )
|
||
{
|
||
Vox_Follow_Chg_Debounce++;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present = BOOST_VPMID_5_2V;
|
||
|
||
if( !nVpmid_Value_Setting )
|
||
{
|
||
Set_PMU_Boost_Vout(n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present);
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG InitSta Set Max Vpmid.(Vox_sta:0x%x)(line:%d)\r\n",(u16)pmu_Info.pmu_VOX_STA, (u16)__LINE__);
|
||
#endif
|
||
nVpmid_Value_Setting = 1;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
Vox_Follow_Chg_Debounce = 0;
|
||
|
||
nVpmid_Value_Setting = 0;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOR_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOL_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOL_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->IVox_TC_Mode[VOR_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->IVox_TC_Mode[VOL_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_Neg = VPMID_MIN_THD;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_Pos = VPMID_MAX_THD;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta1;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG InitSta.(Vox_sta:0x%x)(line:%d)\r\n",(u16)pmu_Info.pmu_VOX_STA, (u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
|
||
break;
|
||
|
||
case Vox_Follow_Chg_Sta1: //STA1:获取耳机当前抽电电流和设置Vox上下限电流阈值。
|
||
|
||
if ( ( pmu_Info.pmu_VOX_STA & VOR_Ioff ) && ( pmu_Info.pmu_VOX_STA & VOL_Ioff ) ) //VOL、VOR耳机无抽电，则说明耳机已充满，无需再继续跟随充。
|
||
{
|
||
n_Vox_Fllow_Chg->Vox_Follow_Stop = ON;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_InitSta;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta1,No EarPhone In Box.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
else
|
||
{
|
||
/*获取当前Ivox。Vox开启功率，且Ioff处于重载状态。*/
|
||
if( !(pmu_Info.pmu_VOX_STA & VOR_Ioff) )
|
||
{
|
||
n_Vox_Fllow_Chg->IVox_Init[VOR_CHAN] = g_pmu_Adc_Ivor;
|
||
|
||
n_Vox_Fllow_Chg->IVox_Threshold_Neg[VOR_CHAN] = ( g_pmu_Adc_Ivor / 5 ) << 2; //Ivox_Threshold_Neg = IVox_Init * 80%
|
||
|
||
n_Vox_Fllow_Chg->IVox_Threshold_Pos[VOR_CHAN] = g_pmu_Adc_Ivor << 1; //Ivox_Threshold_Neg = IVox_Init * 2
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta1,VOR Chging(Ivor:%d).(line:%d)\r\n",g_pmu_Adc_Ivor,(u16)__LINE__);
|
||
#endif
|
||
|
||
}
|
||
|
||
if( !(pmu_Info.pmu_VOX_STA & VOL_Ioff) )
|
||
{
|
||
n_Vox_Fllow_Chg->IVox_Init[VOL_CHAN] = g_pmu_Adc_Ivol;
|
||
|
||
n_Vox_Fllow_Chg->IVox_Threshold_Neg[VOL_CHAN] = ( g_pmu_Adc_Ivol / 5 ) << 2; //Ivox_Threshold_Neg = IVox_Init * 80%
|
||
|
||
n_Vox_Fllow_Chg->IVox_Threshold_Pos[VOL_CHAN] = g_pmu_Adc_Ivol << 1; //Ivox_Threshold_Neg = IVox_Init * 2
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta1,VOL Chging(Ivol:%d).(line:%d)\r\n",g_pmu_Adc_Ivol,(u16)__LINE__);
|
||
#endif
|
||
|
||
}
|
||
|
||
n_Vox_Fllow_Chg->Vox_Follow_Start = ON;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta2;
|
||
}
|
||
|
||
break;
|
||
|
||
case Vox_Follow_Chg_Sta2: //STA2:获取当前Vox电流，等待IVOX电流稳定，检测当前电流IVox_At_Present。
|
||
|
||
if( Vox_Follow_Chg_Debounce <= VOX_FOLLOW_CHG_NOWCURCHK_CNT )
|
||
{
|
||
Vox_Follow_Chg_Debounce++;
|
||
}
|
||
else
|
||
{
|
||
Vox_Follow_Chg_Debounce = 0;
|
||
|
||
if ( !(pmu_Info.pmu_VOX_STA & VOR_Ioff) )
|
||
{
|
||
n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] = g_pmu_Adc_Ivor;
|
||
|
||
n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] = ON; //判断VOR有耳机在盒正常抽电
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta2,Get IVOR.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
|
||
if ( !(pmu_Info.pmu_VOX_STA & VOL_Ioff) )
|
||
{
|
||
n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] = g_pmu_Adc_Ivol;
|
||
|
||
n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] = ON; //判断VOL有耳机在盒正常抽电
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta2,Get IVOL.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta3;
|
||
}
|
||
|
||
break;
|
||
|
||
case Vox_Follow_Chg_Sta3: //STA3:根据Ivox电流，判断PMID是否需要降低。
|
||
|
||
if( Vox_Follow_Chg_Debounce <= VOX_FOLLOW_CHG_VOLTAGE_ADJUST_CNT )
|
||
{
|
||
Vox_Follow_Chg_Debounce++;
|
||
}
|
||
else
|
||
{
|
||
Vox_Follow_Chg_Debounce = 0;
|
||
|
||
if ( ( n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] > n_Vox_Fllow_Chg->IVox_Threshold_Pos[VOR_CHAN] ) || \
|
||
( n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] > n_Vox_Fllow_Chg->IVox_Threshold_Pos[VOL_CHAN] ) ) //当前电流大于THP阈值电流，则说明耳机状态发生改变（TC跳转到CC或Recharge复充），需要重启跟随充。
|
||
{
|
||
Follow_Chg_Sta = Vox_Follow_Chg_InitSta;
|
||
|
||
n_Vox_Fllow_Chg->Vox_Follow_Start = OFF; //重启动跟随充
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3,VOX Chg ReInit.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
else
|
||
{
|
||
if ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] == ON )
|
||
{
|
||
if ( n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] <= VOX_CV_TC_CURRENT ) //检测到Ivor小于CV/TC电流阈值，则说明耳机进入CV/TC阶段
|
||
{
|
||
if ( pmu_Info.pmu_VOX_STA & VOR_Ioff ) //检测到Ivor Ioff，则VPMID升档。
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOR_CHAN] = ON;
|
||
|
||
if ( n_Vox_Fllow_Chg->Vpmid_Threshold_Pos == VPMID_MAX_THD ) //Vpmid电压升到最大，并且IOFF标志存在，则说明耳机充满。
|
||
{
|
||
n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] = OFF;
|
||
|
||
}
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CV),VOR Vpmid AddSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
else //未检测到Ivor Ioff，则Vpmid降档
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CV),VOR Vpmid SubSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if ( n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] > n_Vox_Fllow_Chg->IVox_Threshold_Neg[VOR_CHAN] )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CC),VOR Vpmid SubSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
else
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOR_CHAN] = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CC),VOR Vpmid AddSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
}
|
||
|
||
if ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] == ON )
|
||
{
|
||
if ( n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] <= VOX_CV_TC_CURRENT ) //检测到Ivol小于CV/TC电流阈值，则说明耳机进入CV/TC阶段
|
||
{
|
||
if ( pmu_Info.pmu_VOX_STA & VOL_Ioff ) //检测到Ivol Ioff，则VPMID升档。
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOL_CHAN] = ON;
|
||
|
||
if ( n_Vox_Fllow_Chg->Vpmid_Threshold_Pos == VPMID_MAX_THD ) //Vpmid电压升到最大，并且IOFF标志存在，则说明耳机充满。
|
||
{
|
||
n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] = OFF;
|
||
}
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CV),VOL Vpmid AddSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
else //未检测到Ivol Ioff，则Vpmid降档
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOL_CHAN] = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CV),VOL Vpmid SubSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if ( n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] > n_Vox_Fllow_Chg->IVox_Threshold_Neg[VOL_CHAN] )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOL_CHAN] = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CC),VOL Vpmid SubSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
else
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOL_CHAN] = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta3(CC),VOL Vpmid AddSta.(line:%d)\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
break;
|
||
|
||
case Vox_Follow_Chg_Sta4: //STA4:根据IVOX电流，判断PMID是否升高：1、在此状态下，每2s检测一次IVOX电流；2、当检测到 IVOX < IVOX_THN or IVOX > IVOX_THP,则PMID 升高一个step（或N个step，根据实际测试设定。）
|
||
|
||
if( Vox_Follow_Chg_Debounce <= VOX_FOLLOW_CHG_PMID_UP_CNT )
|
||
{
|
||
/* 每2s检测一次IVOX电流。 */
|
||
Vox_Follow_Chg_Debounce++;
|
||
|
||
n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] = g_pmu_Adc_Ivor;
|
||
|
||
n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] = g_pmu_Adc_Ivol;
|
||
}
|
||
else
|
||
{
|
||
Vox_Follow_Chg_Debounce = 0;
|
||
|
||
if ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] == ON )
|
||
{
|
||
/* 当检测到 IVOX < IVOX_THN or IVOX > IVOX_THP,则PMID 升高一个step（或N个step，根据实际测试设定。） */
|
||
if ( ( n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] < n_Vox_Fllow_Chg->IVox_Threshold_Neg[VOR_CHAN] ) || \
|
||
( n_Vox_Fllow_Chg->IVox_At_Present[VOR_CHAN] > n_Vox_Fllow_Chg->IVox_Threshold_Pos[VOR_CHAN] ) )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOR_CHAN] = ON;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta2;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta4,VOR Vpmid AddSta(line:%d).\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
#ifdef _DEBUG_VOX
|
||
else
|
||
{
|
||
printf("Follow CHG Sta4,VOR Ching(line:%d).\r\n",(u16)__LINE__);
|
||
}
|
||
#endif
|
||
}
|
||
|
||
if ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] == ON )
|
||
{
|
||
if ( ( n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] > n_Vox_Fllow_Chg->IVox_Threshold_Pos[VOL_CHAN] ) || \
|
||
( n_Vox_Fllow_Chg->IVox_At_Present[VOL_CHAN] < n_Vox_Fllow_Chg->IVox_Threshold_Neg[VOL_CHAN] ) )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOL_CHAN] = ON;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta2;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG Sta4,VOL Vpmid AddSta(line:%d).\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
#ifdef _DEBUG_VOX
|
||
else
|
||
{
|
||
printf("Follow CHG Sta4,VOL Ching(line:%d).\r\n",(u16)__LINE__);
|
||
}
|
||
#endif
|
||
}
|
||
}
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
if( ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] == ON ) || ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] == ON ) )
|
||
{
|
||
if( ( n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] == ON ) || ( n_Vox_Fllow_Chg->Vpmid_SubSta[VOL_CHAN] == ON ) ) //当需要降压Vpmid，则每降一次档位，都会充电至少2s。
|
||
{
|
||
|
||
if( ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] == ON ) && ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] == ON ) )
|
||
{
|
||
if( ( n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] == ON ) && ( n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] == ON ) )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta_Flag = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG SubSta,VOL/VOR(line:%d).\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
if( ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] == ON ) && ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] == OFF ) )
|
||
{
|
||
if( n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] == ON )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta_Flag = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG SubSta,VOR(line:%d).\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
else
|
||
if( ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOR_CHAN] == OFF ) && ( n_Vox_Fllow_Chg->Vox_InBox_Sta[VOL_CHAN] == ON ) )
|
||
{
|
||
if( n_Vox_Fllow_Chg->Vpmid_SubSta[VOL_CHAN] == ON )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta_Flag = ON;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG SubSta,VOL(line:%d).\r\n",(u16)__LINE__);
|
||
#endif
|
||
}
|
||
}
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOR_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta[VOL_CHAN] = OFF;
|
||
|
||
if ( n_Vox_Fllow_Chg->Vpmid_SubSta_Flag == ON )
|
||
{
|
||
if( n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present > VPMID_MIN_THD )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present = n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present - VOX_FOLLOW_CHG_PMID_DOWN_STEPS;
|
||
}
|
||
|
||
if( n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present <= n_Vox_Fllow_Chg->Vpmid_Threshold_Neg ) //当Vpmid降档到到下限阈值，则开始升压。
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present = n_Vox_Fllow_Chg->Vpmid_Threshold_Neg;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta4;
|
||
}
|
||
else
|
||
{
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta2;
|
||
}
|
||
|
||
Vox_Follow_Chg_Debounce = 0;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_SubSta_Flag = OFF;
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG SubSta,(STA:0x%x,Vpmid:0x%x)(line:%d)\r\n",(u16)Follow_Chg_Sta,(u16)n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present,(u16)__LINE__);
|
||
#endif
|
||
Set_PMU_Boost_Vout( n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present );
|
||
}
|
||
}
|
||
else
|
||
{
|
||
/* PMID > PMID_THP，且VOL和VOR的任意一支路电流超过阈值，Ivol_THN > Ivol > Ivol_THP 或 Ivor_THN > Ivor > Ivor_THP。*/
|
||
if( ( n_Vox_Fllow_Chg->Vpmid_AddSta[VOR_CHAN] == ON ) || ( n_Vox_Fllow_Chg->Vpmid_AddSta[VOL_CHAN] == ON ) )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOR_CHAN] = OFF;
|
||
|
||
n_Vox_Fllow_Chg->Vpmid_AddSta[VOL_CHAN] = OFF;
|
||
|
||
if( n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present < VPMID_MAX_THD )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present = n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present + VOX_FOLLOW_CHG_PMID_UP_STEPS;
|
||
}
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta4; //当有需要升压Vpmid，则需要重回Sta4。
|
||
|
||
/* 当VPMID 上升到上限阈值，则说明本轮跟随充调整结束，则重回StaInit。 */
|
||
if( n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present >= n_Vox_Fllow_Chg->Vpmid_Threshold_Pos )
|
||
{
|
||
n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present = n_Vox_Fllow_Chg->Vpmid_Threshold_Pos;
|
||
|
||
Follow_Chg_Sta = Vox_Follow_Chg_Sta1;
|
||
}
|
||
#ifdef _DEBUG_VOX
|
||
printf("Follow CHG AddSta,(STA:0x%x,Vpmid:0x%x)(line:%d)\r\n",(u16)Follow_Chg_Sta,(u16)n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present,(u16)__LINE__);
|
||
#endif
|
||
Set_PMU_Boost_Vout(n_Vox_Fllow_Chg->Vpmid_Threshold_At_Present);
|
||
|
||
}
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if( Follow_Chg_Sta > Vox_Follow_Chg_Sta2 )
|
||
{
|
||
Follow_Chg_Sta = Vox_Follow_Chg_InitSta;
|
||
|
||
n_Vox_Fllow_Chg->Vox_Follow_Stop = ON;
|
||
}
|
||
}
|
||
}
|
||
|
||
#endif
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* uint8_t Crc8Maxim(u8 *buf, u8 length)
|
||
*
|
||
* Description : 校验和的计算
|
||
*
|
||
*
|
||
* Arguments : u8 *buf: 数据存放地址
|
||
u8 length: 数据长度, 以byte为单位
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
uint8_t Crc8Maxim(u8 *buf, u8 length)
|
||
{
|
||
u8 i;
|
||
u8 crc = 0;
|
||
while(length--)
|
||
{
|
||
crc ^= *buf++;
|
||
for(i=0;i<8;i++)
|
||
{
|
||
if( crc&1 )
|
||
{
|
||
crc = (crc >> 1)^0x8c;
|
||
}
|
||
else
|
||
{
|
||
crc >>= 1;
|
||
}
|
||
}
|
||
}
|
||
return crc;
|
||
}
|
||
|
||
#ifdef VOX_TX
|
||
/*
|
||
*******************************************************************************
|
||
* void HandleTxCommand(VOX_BES_COMMAND_E RxCommand, e_Vox_Chan nVox_Chn_Select)
|
||
*
|
||
* Description : 发送数据包的封装，并打开相应的双向通信通道
|
||
* Command payload
|
||
* Header checksum side cmd len Data
|
||
* 1bytes 1byte 1byte 1byte 1byte Len bytes
|
||
|
||
*
|
||
* Arguments : VOX_BES_COMMAND_E TxCommand: , e_Vox_Chan nVox_Chn_Select
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
idata uint8_t Net_Info[2][8] = {0};
|
||
|
||
idata uint8_t MAC_Addr[2][18] = {0};
|
||
|
||
uint8_t EarPhone_Num = 0;
|
||
|
||
#define MAX_PACKET_SIZE 0x20
|
||
|
||
void HandleTxCommand(VOX_BES_COMMAND_E TxCommand, e_Vox_Chan nVox_Chn_Select)
|
||
{
|
||
uint8_t dataLen = 0;
|
||
uint8_t tx_pData[COM0_Data_Lenth] = 0;
|
||
uint8_t i = 0;
|
||
|
||
/*数据包头*/
|
||
tx_pData[0] = 0x00;
|
||
tx_pData[1] = BOXHEADER>>8;
|
||
tx_pData[2] = BOXHEADER;
|
||
/*指令编号*/
|
||
tx_pData[4] = TxCommand;
|
||
|
||
Vox_Type = nVox_Chn_Select;
|
||
|
||
switch(TxCommand)
|
||
{
|
||
case VHOUSE_CMD_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x02;
|
||
|
||
if( nVox_Chn_Select == VOL_CHAN )
|
||
{
|
||
tx_pData[5] = 0x02;
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 0;
|
||
}
|
||
else
|
||
if( nVox_Chn_Select == VOR_CHAN )
|
||
{
|
||
tx_pData[5] = 0x01;
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 0;
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_EXCH_TWS_BTADDR:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x1B;
|
||
|
||
for(i=5;i<18;i++)
|
||
{
|
||
tx_pData[i] = MAC_Addr[nVox_Chn_Select][i];
|
||
}
|
||
|
||
for(i=23;i<8;i++)
|
||
{
|
||
tx_pData[i] = Net_Info[nVox_Chn_Select][i];
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLEAR_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x02;
|
||
tx_pData[5] = 0x03;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_WIN_GET_VBAT: //和开盖命令一样。
|
||
|
||
case VHOUSE_CMD_OPEN_BOX: //开盖获取电量命令
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x05;
|
||
tx_pData[5] = FW_VER; //Version
|
||
tx_pData[6] = bat_level_Pec; //电仓电量值 0~100；
|
||
|
||
tx_pData[7] = MAX_PACKET_SIZE; //max_packet_size:0x20
|
||
|
||
if( nVox_Chn_Select == VOL_CHAN )
|
||
{
|
||
if( Earphone_Vbat[VOL_CHAN] == 0 )
|
||
{
|
||
tx_pData[8] = 0xFF;
|
||
}
|
||
else
|
||
{
|
||
tx_pData[8] = Earphone_Vbat[VOR_CHAN];
|
||
}
|
||
}
|
||
else
|
||
if( nVox_Chn_Select == VOR_CHAN )
|
||
{
|
||
if( Earphone_Vbat[VOR_CHAN] == 0 )
|
||
{
|
||
tx_pData[8] = 0xFF;
|
||
}
|
||
else
|
||
{
|
||
tx_pData[8] = Earphone_Vbat[VOL_CHAN];
|
||
}
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_PWROFF:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x01;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_BOX: //关盖指令
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x02;
|
||
tx_pData[5] = EarPhone_Num; //耳机个数
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
dataLen = 4 + tx_pData[3];
|
||
|
||
tx_pData[dataLen] = Crc8Maxim(tx_pData,dataLen);
|
||
|
||
#if 0
|
||
/* vor、vol使用不同uart进行通讯 */
|
||
if(nVox_Chn_Select == VOL_CHAN)
|
||
{
|
||
VOL_EN_Type(VOX_COMM_Mode_Uart);
|
||
|
||
#if UART1_ENABLE
|
||
Uart1SendPacket(tx_pData[4] + 6, tx_pData);
|
||
#endif
|
||
VOL_EN_Type(VOX_VOUT_Mode);
|
||
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOR_CHAN)
|
||
{
|
||
VOR_EN_Type(VOX_COMM_Mode_Uart);
|
||
|
||
#if UART0_ENABLE
|
||
Uart0SendPacket(tx_pData[4] + 6, tx_pData);
|
||
#endif
|
||
VOR_EN_Type(VOX_VOUT_Mode);
|
||
}
|
||
|
||
#else
|
||
/* vor、vol都使用uart0进行分时通讯。 */
|
||
VOX_EN_Type( VOX_COMM_Mode_Uart );
|
||
|
||
if(nVox_Chn_Select == VOL_CHAN)
|
||
{
|
||
SFRADDR = MFP_CTL0; //关闭VOR到UART0的开关，配置P02为GPIO，P03为UART0。
|
||
SFRDATA &=~ 0x0F;
|
||
SFRDATA |= 0x08;
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOR_CHAN)
|
||
{
|
||
SFRADDR = MFP_CTL0; //关闭VOL到UART0的开关，配置P03为GPIO，P02为UART0。
|
||
SFRDATA &=~ 0x0F;
|
||
SFRDATA |= 0x01;
|
||
}
|
||
|
||
#if UART0_ENABLE
|
||
Uart0SendPacket(dataLen + 1, tx_pData);
|
||
#endif
|
||
|
||
VOX_EN_Type( VOX_VOUT_Mode );
|
||
|
||
#endif
|
||
}
|
||
|
||
#endif
|
||
|
||
#ifdef VOX_RX
|
||
/*
|
||
*******************************************************************************
|
||
* void HandleRxCommand(VOX_BES_COMMAND_E RxCommand)
|
||
*
|
||
* Description : 耳机端发送的数据包的解析及处理
|
||
* Ack payload:
|
||
* Header checksum side cmd len Data
|
||
* 1bytes 1byte 1byte 1byte 1byte Len bytes
|
||
*
|
||
* Arguments : VOX_BES_COMMAND_E RxCommand:
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
void HandleRxMsg(VOX_BES_COMMAND_E RxCommand)
|
||
{
|
||
uint8_t i = 0;
|
||
|
||
switch(RxCommand)
|
||
{
|
||
case VHOUSE_CMD_PAIR:
|
||
|
||
for(i=0;i<18;i++)
|
||
{
|
||
MAC_Addr[Vox_Type][i] = RX0_Buffer[4+i];
|
||
}
|
||
|
||
for(i=0;i<8;i++)
|
||
{
|
||
Net_Info[Vox_Type][i] = RX0_Buffer[22+i];
|
||
}
|
||
|
||
if( Vox_Type == VOL_CHAN ) //根据耳机Side参数
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 1; //获取左耳机发的CMD3
|
||
}
|
||
else
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 1; //获取右耳机发的CMD3
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_EXCH_TWS_BTADDR:
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_OPEN_BOX:
|
||
|
||
case VHOUSE_CMD_CLOSE_WIN_GET_VBAT:
|
||
|
||
if( RX0_Buffer[4] == 0xE3 ) //根据耳机Side参数
|
||
{
|
||
Vox_Get_Vbat_Flag[VOL_TYPE] = 1; //获取左耳机发的Vbat
|
||
|
||
Earphone_Vbat[VOL_CHAN] = RX0_Buffer[5];
|
||
}
|
||
else
|
||
{
|
||
Vox_Get_Vbat_Flag[VOR_TYPE] = 1; //获取右耳机发的Vbat
|
||
|
||
Earphone_Vbat[VOR_CHAN] = RX0_Buffer[5];
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_BOX:
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_PWROFF:
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
}
|
||
|
||
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* void HandleVoxCommMsg(void)
|
||
*
|
||
* Description : Vox 通讯功能处理函数，100ms定时调用。由于和耳机通信前需要打开耳机端的TRX功能，并且每次通信只能一只耳机。通过切换VOL/VOR通信开关进行通信
|
||
*
|
||
* Arguments : NONE
|
||
|
||
* Returns : NONE
|
||
|
||
* Notes : NONE
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
|
||
void HandleVoxCommMsg(void)
|
||
{
|
||
uint8_t CrcCheckSum = 0;
|
||
uint8_t i = 0;
|
||
|
||
/*RX数据处理*/
|
||
if( Uart0_RX_Finish_Flag )
|
||
{
|
||
Uart0_RX_Finish_Flag = 0;
|
||
|
||
CrcCheckSum = Crc8Maxim(RX0_Buffer, RX0_Buffer[2] + 3); //求校验和
|
||
|
||
if( CrcCheckSum == RX0_Buffer[RX0_Buffer[2] + 3] )
|
||
{
|
||
HandleRxMsg((VOX_BES_COMMAND_E)RX0_Buffer[3]);
|
||
}
|
||
else
|
||
{
|
||
return;
|
||
}
|
||
}
|
||
}
|
||
|
||
|
||
#endif
|
||
|
||
#endif
|
||
|