971 lines
20 KiB
C
971 lines
20 KiB
C
/*
|
||
******************************************************************************
|
||
*
|
||
* @file vox_comm.c
|
||
* @brief VOX Communicate module
|
||
* @ic sy8837/8/9
|
||
*
|
||
* @version 1.0
|
||
* @date 2025/02/13 017:40:40
|
||
* @author Alex Xu
|
||
*
|
||
* Copyright (c) 2013-2099,Tkplusemi Technology Co.,Ltd.
|
||
* All Rights Reserved
|
||
*
|
||
* History:
|
||
* Revision Date Author Desc
|
||
* 1.0.0 2025/02/13 Alex build this file
|
||
******************************************************************************
|
||
*/
|
||
/*_____ I N C L U D E S ____________________________________________________*/
|
||
#include "vox_module.h"
|
||
#include "vox_comm.h"
|
||
#include "system.h"
|
||
#include "vox_comm.h"
|
||
#include "bat.h"
|
||
#include "hall.h"
|
||
|
||
/******************************************************************************\
|
||
Macro definitions
|
||
\******************************************************************************/
|
||
#define MAX_PACKET_SIZE 0x20
|
||
|
||
/******************************************************************************\
|
||
Variables definitions
|
||
\******************************************************************************/
|
||
|
||
#if XUANHENG
|
||
|
||
idata uint8_t Vox_Pairing_State[2]; //耳机配对状态，0是无效，1是正在配对，2是配对成功，3不处理，保持当前状态。
|
||
|
||
uint8_t Vox_Set_BES_Addr_Flag[2];
|
||
|
||
idata uint8_t BES_Addr[6]; //蓝牙耳机地址，Vox_Bes_Addr[0][6]：VOL；Vox_Bes_Addr[1][6]：VOR
|
||
|
||
idata uint8_t Random_Data[8];
|
||
|
||
uint8_t Bes_Bet_Level[2]; //对耳电池电量信息，Bes_Bet_Level[0]：左耳；Bes_Bet_Level[1]：右耳
|
||
|
||
uint8_t Bes_Chg_Full[2]; //对耳硬件是否满电：0非满电；1：满电。
|
||
|
||
uint8_t Tws_Paired_Record[2]; //TWS配对记录；0：有TWS配对记录；1：没有TWS配对记录；
|
||
|
||
uint8_t Phone_Paired_Record[2]; //手机配对记录；0：有与手机配对记录；1：没有和手机配对记录。
|
||
|
||
uint8_t Bes_OTA_State[2]; //耳机静默升级状态；1：有；0：没有
|
||
|
||
uint8_t Bes_Set_SN_State[2]; //耳机应答仓写入SN是否成功。1：成功；0：失败
|
||
|
||
uint8_t Bes_In_Pair_State[2]; //耳机进入配对状态标志位
|
||
|
||
uint8_t Vox_Clear_Pair_Flag[2];
|
||
|
||
bit Vol_Bes_Addr_Flag;
|
||
|
||
bit Vor_Bes_Addr_Flag;
|
||
|
||
idata uint8_t SN_Num[22]; //SN码，需要从OTP的固定位置获取。
|
||
|
||
idata uint8_t SN_Num_Start; //SN码发送起始位置，有开盖动作时清零。
|
||
|
||
bit gShip_Mode_Flag; //船运模式标志位：0：正常关机；1：船运模式
|
||
|
||
#elif JIELI
|
||
|
||
uint8_t Vox_Type;
|
||
|
||
uint8_t Net_Info[2][13];
|
||
|
||
idata uint8_t MAC_Addr[2][18];
|
||
|
||
uint8_t Earphone_Vbat[2]; //对耳电量
|
||
|
||
#endif
|
||
|
||
|
||
#ifdef VOX_RX
|
||
|
||
uint8_t Vox_Get_Vbat_Flag[2]; //耳机配对状态，VOL:低4bit；VOR:高4bit。0是无效，1是正在配对，2是配对成功，3不处理，保持当前状态。
|
||
uint8_t Vox_Get_BES_Addr_Flag[2];
|
||
//idata uint8_t BES_Addr[6] = {0}; //蓝牙耳机地址，Vox_Bes_Addr[0][6]：VOL；Vox_Bes_Addr[1][6]：VOR
|
||
|
||
#endif
|
||
|
||
/******************************************************************************\
|
||
Functions definitions
|
||
\******************************************************************************/
|
||
#if XUANHENG
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* u16 CalCheckCrc16(u8 * pucFrame, u16 usLen)
|
||
*
|
||
* Description : 校验和的计算(CRC-16-CCITT-FALSE)
|
||
*
|
||
*
|
||
* Arguments : u8 *pucFrame: 数据存放地址
|
||
u16 usLen: 数据长度, 以byte为单位
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
|
||
uint16_t CalCheckCrc16(uint8_t *pucFrame, unsigned int usLen)
|
||
{
|
||
uint16_t wCRCin = 0xFFFF;
|
||
uint16_t wCPoly = 0x1021;
|
||
uint8_t wChar = 0;
|
||
unsigned int i;
|
||
|
||
while (usLen--)
|
||
{
|
||
|
||
wChar = *(pucFrame++);
|
||
|
||
wCRCin ^= (wChar << 8);
|
||
|
||
for(i = 0;i < 8;i++)
|
||
{
|
||
if(wCRCin & 0x8000)
|
||
{
|
||
wCRCin = (wCRCin << 1) ^ wCPoly;
|
||
}
|
||
else
|
||
{
|
||
wCRCin = wCRCin << 1;
|
||
}
|
||
}
|
||
}
|
||
|
||
return (wCRCin);
|
||
}
|
||
|
||
#else
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* uint8_t Crc8Maxim(u8 *buf, u8 length)
|
||
*
|
||
* Description : 校验和的计算
|
||
*
|
||
*
|
||
* Arguments : u8 *buf: 数据存放地址
|
||
u8 length: 数据长度, 以byte为单位
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
uint8_t Crc8Maxim(u8 *buf, u8 length)
|
||
{
|
||
u8 i;
|
||
u8 crc = 0;
|
||
while(length--)
|
||
{
|
||
crc ^= *buf++;
|
||
for(i=0;i<8;i++)
|
||
{
|
||
if( crc&1 )
|
||
{
|
||
crc = (crc >> 1)^0x8c;
|
||
}
|
||
else
|
||
{
|
||
crc >>= 1;
|
||
}
|
||
}
|
||
}
|
||
return crc;
|
||
}
|
||
|
||
#endif
|
||
|
||
#ifdef VOX_TX
|
||
/*
|
||
*******************************************************************************
|
||
* void HandleTxCommand(VOX_BES_COMMAND_E RxCommand, e_Vox_Chan nVox_Chn_Select)
|
||
*
|
||
* Description : 发送数据包的封装，并打开相应的双向通信通道
|
||
* Command payload
|
||
* Header checksum side cmd len Data
|
||
* 1bytes 1byte 1byte 1byte 1byte Len bytes
|
||
|
||
*
|
||
* Arguments : VOX_BES_COMMAND_E TxCommand: , e_Vox_Chan nVox_Chn_Select
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
void HandleTxCommand(VOX_BES_COMMAND_E TxCommand, e_Vox_Chan nVox_Chn_Select)
|
||
{
|
||
uint16_t dataLen = 0;
|
||
|
||
uint8_t tx_pData[COM1_Data_Lenth] = 0;
|
||
|
||
uint8_t i = 0;
|
||
|
||
#if JIELI
|
||
|
||
/*数据包头*/
|
||
tx_pData[0] = 0x00;
|
||
tx_pData[1] = BOXHEADER>>8;
|
||
tx_pData[2] = BOXHEADER;
|
||
/*指令编号*/
|
||
tx_pData[4] = TxCommand;
|
||
|
||
Vox_Type = nVox_Chn_Select;
|
||
|
||
switch(TxCommand)
|
||
{
|
||
case VHOUSE_CMD_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x02;
|
||
|
||
if( nVox_Chn_Select == VOL_CHAN )
|
||
{
|
||
tx_pData[5] = 0x02;
|
||
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 0;
|
||
}
|
||
else
|
||
if( nVox_Chn_Select == VOR_CHAN )
|
||
{
|
||
tx_pData[5] = 0x01;
|
||
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 0;
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_EXCH_TWS_BTADDR:
|
||
/*Data Length*/
|
||
tx_pData[3] = MAX_PACKET_SIZE;
|
||
|
||
for(i=5;i<18;i++)
|
||
{
|
||
tx_pData[i] = MAC_Addr[nVox_Chn_Select][i];
|
||
}
|
||
|
||
for(i=23;i<13;i++)
|
||
{
|
||
tx_pData[i] = Net_Info[nVox_Chn_Select][i];
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLEAR_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x02;
|
||
|
||
tx_pData[5] = 0x03;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_WIN_GET_VBAT: //和开盖命令一样。
|
||
|
||
case VHOUSE_CMD_OPEN_BOX: //开盖获取电量命令
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x05;
|
||
|
||
tx_pData[5] = FW_VER; //Version
|
||
|
||
tx_pData[6] = bat_level * 5; //电仓电量值 0~100；
|
||
|
||
tx_pData[7] = MAX_PACKET_SIZE; //max_packet_size:0x20
|
||
|
||
if( nVox_Chn_Select == VOL_CHAN )
|
||
{
|
||
if( Earphone_Vbat[VOL_CHAN] == 0 )
|
||
{
|
||
tx_pData[8] = 0xFF;
|
||
}
|
||
else
|
||
{
|
||
tx_pData[8] = Earphone_Vbat[VOR_CHAN];
|
||
}
|
||
}
|
||
else
|
||
if( nVox_Chn_Select == VOR_CHAN )
|
||
{
|
||
if( Earphone_Vbat[VOR_CHAN] == 0 )
|
||
{
|
||
tx_pData[8] = 0xFF;
|
||
}
|
||
else
|
||
{
|
||
tx_pData[8] = Earphone_Vbat[VOL_CHAN];
|
||
}
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_PWROFF:
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x01;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_BOX: //关盖指令
|
||
/*Data Length*/
|
||
tx_pData[3] = 0x02;
|
||
tx_pData[5] = EarPhone_Num; //耳机个数
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
dataLen = 4 + tx_pData[3];
|
||
|
||
tx_pData[dataLen] = Crc8Maxim(tx_pData,dataLen);
|
||
|
||
#elif ZHONGKE
|
||
|
||
/*数据包头*/
|
||
tx_pData[0] = BOXHEADER>>8;
|
||
tx_pData[1] = BOXHEADER;
|
||
/*充电仓识别码*/
|
||
tx_pData[2] = BOXIDCODE;
|
||
/*耳机通道*/
|
||
tx_pData[5] = nVox_Chn_Select;
|
||
/*指令编号*/
|
||
tx_pData[3] = TxCommand;
|
||
|
||
switch(TxCommand)
|
||
{
|
||
case VHOUSE_CMD_GET_VBAT:
|
||
|
||
case VHOUSE_CMD_OPEN_WINDOW:
|
||
|
||
case VHOUSE_CMD_CLOSE_WIN_GET_VBAT:
|
||
|
||
/*Data Length*/
|
||
tx_pData[4] = 0x03;
|
||
|
||
tx_pData[6] = ( ( ChgStatus & CHG_STA_ING ) << 6 ) | bat_level; //bit 0~6 表示充电仓电量值 0~100；bit 7 为 1 表示在给充电仓充电，为 0 表示没有给充电仓充电；
|
||
|
||
tx_pData[7] = 0x00;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_PAIR: //长按充电仓按键3s，充电仓发送配对指令。
|
||
/*
|
||
发送给右耳 CMD2，右耳接收到，发送 CMD3 指令给充电仓，充电仓 copy 该指令给
|
||
左耳，充电仓可随即发送 CMD2 指令给左耳，左耳会发送 CMD=0x03 给充电仓，充电仓直接
|
||
copy CMD3 给右耳即可，右耳接收到发送 VHOUSE_CMD_SUCCES 指令给充电仓。
|
||
*/
|
||
/*Data Length*/
|
||
tx_pData[4] = 0x01;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_GET_TWS_BTADDR: //将收到的CMD3转发给对耳。
|
||
#ifdef VOX_RX
|
||
for(i=0;i<COM1_Data_Lenth;i++)
|
||
{
|
||
tx_pData[i] = RX1_Buffer[i];
|
||
}
|
||
#endif
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLEAR_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[4] = 0x01;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_WINDOW:
|
||
/*Data Length*/
|
||
tx_pData[4] = 0x01;
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_PWROFF:
|
||
/*Data Length*/
|
||
tx_pData[4] = 0x01;
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
dataLen = tx_pData[4] + 5;
|
||
|
||
tx_pData[dataLen] = Crc8Maxim(tx_pData,dataLen);
|
||
|
||
#elif XUANHENG
|
||
|
||
uint16_t Checksum = 0;
|
||
|
||
/*数据包头*/
|
||
tx_pData[0] = BOXHEADER;
|
||
/*耳机通道*/
|
||
|
||
tx_pData[1] = nVox_Chn_Select; /*传输方向：Bit0-3：接收端；Bit4-7：发送端
|
||
1：双耳
|
||
2：充电盒
|
||
3：PC/工装
|
||
4：左耳
|
||
5：右耳
|
||
*/
|
||
/*指令编号*/
|
||
tx_pData[2] = TxCommand;
|
||
tx_pData[3] = TxCommand >> 8; /*小端模式：低字节在前
|
||
Bit0-7：命令号
|
||
Bit8-14：预留
|
||
Bit15:包类型
|
||
0:REQ
|
||
1:ACK
|
||
*/
|
||
tx_pData[4] = CoverStatus; //开关盒状态
|
||
|
||
switch(TxCommand)
|
||
{
|
||
case CMD_TWS_GET_BTADDR: //获取耳机MAC地址
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x00; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
#ifdef VOX_RX
|
||
for(i=0;i<6;i++)
|
||
{
|
||
BES_Addr[i] = 0; //清本地耳机蓝牙地址。
|
||
}
|
||
#endif
|
||
break;
|
||
|
||
case CMD_TWS_SET_BTADDR:
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x0E; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
#ifdef VOX_RX
|
||
for(i=0;i<6;i++)
|
||
{
|
||
tx_pData[7+i] = BES_Addr[i]; //发送耳机蓝牙地址。
|
||
}
|
||
#endif
|
||
for(i=0;i<8;i++)
|
||
{
|
||
tx_pData[13+i] = Random_Data[i]; //发送随机数。
|
||
}
|
||
|
||
break;
|
||
|
||
case CMD_SHUT_DOWN:
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x01; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
|
||
tx_pData[7] = gShip_Mode_Flag; //船运模式：0：正常关机；1：船运模式
|
||
|
||
break;
|
||
|
||
case CMD_PAIRING_IMD: //立即执行TWS配对
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x00; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
|
||
break;
|
||
|
||
case CMD_CLEAR_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x00; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
break;
|
||
|
||
case CMD_HEARTBEAT:
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x05; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
/*
|
||
data定义：
|
||
1、D0、D1（2Bytes）构成充电盒的版本信息，D0的高4bit为充电盒硬件PCBA版本号，D0低4bit和D1构成充电盒软件版本号。
|
||
2、D2（1Byte）构成充电盒电量和充电状态，D2的bit7为是否有PG接入；D2的低7位表示充电盒电量信息，范围0-100;
|
||
3、D3（1Byte）构成对耳电量信息，根据协议中的Side信息区分左右耳电量信息。
|
||
4、D4（1Byte）耳机静默升级，充电盒默认发0x00
|
||
*/
|
||
tx_pData[7] = HW_VER << 4;
|
||
tx_pData[7] |= FW_VER >> 8;
|
||
tx_pData[8] = FW_VER;
|
||
|
||
tx_pData[9] = ( ( ChgStatus & CHG_STA_ING ) << 6 ) | ( 5 * bat_level );
|
||
|
||
if(nVox_Chn_Select == VOL_CHAN)
|
||
{
|
||
tx_pData[10] = Bes_Bet_Level[0];
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOR_CHAN)
|
||
{
|
||
tx_pData[10] = Bes_Bet_Level[1];
|
||
}
|
||
|
||
tx_pData[11] = 0x00;
|
||
|
||
break;
|
||
|
||
case CMD_SN: //由于SN码较长，充电盒需分多次发送，D0表示充第几位开始发送，一次固定发送9Bytes。最后一包SN数据不够9Bytes的补0或0xff。
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x0A; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
|
||
tx_pData[7] = SN_Num_Start;
|
||
|
||
for(i=0;i<9;i++)
|
||
{
|
||
if( (SN_Num_Start + i) > 22 )
|
||
{
|
||
tx_pData[8+i] = 0xFF;
|
||
}
|
||
else
|
||
{
|
||
tx_pData[8+i] = SN_Num[ SN_Num_Start + i ]; //发送随机数。
|
||
}
|
||
}
|
||
|
||
SN_Num_Start += 9;
|
||
|
||
break;
|
||
|
||
case CMD_GET_INTO_PAIR:
|
||
/*Data Length*/
|
||
tx_pData[5] = 0x01; //小端模式，低位在前，长2Bytes。
|
||
tx_pData[6] = 0x00;
|
||
|
||
tx_pData[7] = 0x01; //01进入配对状态
|
||
break;
|
||
|
||
case BES_RESET: //复位patten
|
||
|
||
return;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
dataLen = (uint16_t)( tx_pData[5] | ( tx_pData[6] << 8 ) ) + 7;
|
||
|
||
Checksum = CalCheckCrc16( tx_pData, dataLen ); //计算检验和
|
||
|
||
tx_pData[ dataLen ] = Checksum;
|
||
|
||
tx_pData[ ++dataLen ] = Checksum >> 8;
|
||
|
||
#endif
|
||
|
||
/* vor、vol都使用uart1进行分时通讯，设置TX模式*/
|
||
#ifdef VOX_ADT_ENABLE
|
||
|
||
if(nVox_Chn_Select == VOL_CHAN)
|
||
{
|
||
VOL_EN_Type( VOX_COMM_Mode_Uart );
|
||
}
|
||
else
|
||
{
|
||
VOR_EN_Type( VOX_COMM_Mode_Uart );
|
||
}
|
||
|
||
#else
|
||
|
||
VOX_EN_Type( VOX_COMM_Mode_Uart );
|
||
|
||
#endif
|
||
|
||
if(nVox_Chn_Select == VOL_CHAN)
|
||
{
|
||
COMM_CTL |= Vol_SWDT;
|
||
|
||
COMM_CTL &= ~Vol_SWDR;
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOR_CHAN)
|
||
{
|
||
COMM_CTL |= Vor_SWDT;
|
||
|
||
COMM_CTL &= ~Vor_SWDR;
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOX_BOTH)
|
||
{
|
||
COMM_CTL |= Vor_SWDT | Vol_SWDT;
|
||
|
||
COMM_CTL &= ~( Vor_SWDR |Vol_SWDR );
|
||
}
|
||
|
||
#if UART1_ENABLE
|
||
Uart1SendPacket(dataLen + 2, tx_pData);
|
||
#endif
|
||
|
||
/* 设置RX模式。 */
|
||
if(nVox_Chn_Select == VOL_CHAN)
|
||
{
|
||
COMM_CTL &= ~ Vol_SWDT;
|
||
|
||
COMM_CTL |= Vol_SWDR;
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOR_CHAN)
|
||
{
|
||
COMM_CTL &= ~Vor_SWDT;
|
||
|
||
COMM_CTL |= Vor_SWDR;
|
||
}
|
||
else
|
||
if(nVox_Chn_Select == VOX_BOTH)
|
||
{
|
||
COMM_CTL &= ~Vor_SWDT | Vol_SWDT;
|
||
|
||
COMM_CTL |= ( Vor_SWDR |Vol_SWDR );
|
||
}
|
||
}
|
||
|
||
#endif
|
||
|
||
|
||
#ifdef VOX_RX
|
||
/*
|
||
*******************************************************************************
|
||
* void HandleRxCommand(VOX_BES_COMMAND_E RxCommand)
|
||
*
|
||
* Description : 耳机端发送的数据包的解析及处理
|
||
* Ack payload:
|
||
* Header checksum side cmd len Data
|
||
* 1bytes 1byte 1byte 1byte 1byte Len bytes
|
||
*
|
||
* Arguments : VOX_BES_COMMAND_E RxCommand:
|
||
|
||
* Returns :
|
||
*
|
||
* Notes :
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
static void HandleRxMsg(VOX_BES_COMMAND_E RxCommand)
|
||
{
|
||
uint8_t i = 0;
|
||
|
||
#if JIELI
|
||
|
||
switch(RxCommand)
|
||
{
|
||
case VHOUSE_CMD_PAIR:
|
||
|
||
for(i=0;i<18;i++)
|
||
{
|
||
MAC_Addr[Vox_Type][i] = RX1_Buffer[4+i];
|
||
}
|
||
|
||
for(i=0;i<8;i++)
|
||
{
|
||
Net_Info[Vox_Type][i] = RX1_Buffer[22+i];
|
||
}
|
||
|
||
if( Vox_Type == VOL_CHAN ) //根据耳机Side参数
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 1; //获取左耳机发的CMD3
|
||
}
|
||
else
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 1; //获取右耳机发的CMD3
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_EXCH_TWS_BTADDR:
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_OPEN_BOX:
|
||
|
||
case VHOUSE_CMD_CLOSE_WIN_GET_VBAT:
|
||
|
||
if( RX1_Buffer[4] == 0xE3 ) //根据耳机Side参数
|
||
{
|
||
Vox_Get_Vbat_Flag[VOL_TYPE] = 1; //获取左耳机发的Vbat
|
||
|
||
Earphone_Vbat[VOL_CHAN] = RX1_Buffer[5];
|
||
}
|
||
else
|
||
{
|
||
Vox_Get_Vbat_Flag[VOR_TYPE] = 1; //获取右耳机发的Vbat
|
||
|
||
Earphone_Vbat[VOR_CHAN] = RX1_Buffer[5];
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_CLOSE_BOX:
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_PWROFF:
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
#elif ZHONGKE
|
||
|
||
switch(RxCommand)
|
||
{
|
||
case VHOUSE_CMD_GET_VBAT:
|
||
|
||
case VHOUSE_CMD_CLOSE_WINDOW:
|
||
|
||
case VHOUSE_CMD_OPEN_WINDOW:
|
||
|
||
case VHOUSE_CMD_CLOSE_WIN_GET_VBAT:
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_SUCCESS:
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_GET_TWS_BTADDR:
|
||
|
||
if( RX1_Buffer[5] == VOL_CHAN ) //根据耳机Side参数
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 1; //获取左耳机发的CMD3
|
||
}
|
||
else
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 1; //获取右耳机发的CMD3
|
||
}
|
||
|
||
break;
|
||
|
||
case VHOUSE_CMD_SYS_RST: //系统复位，耳机->充电仓
|
||
|
||
break;
|
||
|
||
default:
|
||
break;
|
||
}
|
||
|
||
#elif XUANHENG
|
||
|
||
uint8_t CMD_Type = 0;
|
||
|
||
CMD_Type = RX1_Buffer[1] >> 4;
|
||
if( CMD_Type & TWS_PC ) //PC/工装->盒子
|
||
{
|
||
|
||
}
|
||
else //耳机->盒子
|
||
{
|
||
switch(RxCommand)
|
||
{
|
||
case CMD_TWS_GET_BTADDR:
|
||
|
||
for(i=0;i<RX1_Buffer[5];i++)
|
||
{
|
||
BES_Addr[i] = RX1_Buffer[i+7]; //获取耳机MAC地址。
|
||
}
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOL_TYPE] = 1; //左耳机蓝牙地址写入是否成功状态标志
|
||
}
|
||
else
|
||
{
|
||
Vox_Get_BES_Addr_Flag[VOR_TYPE] = 1; //右耳机蓝牙地址写入是否成功状态标志
|
||
}
|
||
|
||
break;
|
||
|
||
case CMD_SHUT_DOWN:
|
||
|
||
break;
|
||
|
||
case CMD_TWS_SET_BTADDR:
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Vox_Set_BES_Addr_Flag[VOL_TYPE] = RX1_Buffer[7]; //左耳机蓝牙地址写入是否成功状态标志
|
||
}
|
||
else
|
||
{
|
||
Vox_Set_BES_Addr_Flag[VOR_TYPE] = RX1_Buffer[7]; //右耳机蓝牙地址写入是否成功状态标志
|
||
}
|
||
|
||
break;
|
||
|
||
case CMD_CLEAR_PAIR: //按键长按10s发送此命令。
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Vox_Clear_Pair_Flag[VOL_TYPE] = 1; //左耳机蓝牙地址写入是否成功状态标志
|
||
}
|
||
else
|
||
{
|
||
Vox_Clear_Pair_Flag[VOR_TYPE] = 1; //右耳机蓝牙地址写入是否成功状态标志
|
||
}
|
||
|
||
break;
|
||
case CMD_HEARTBEAT:
|
||
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Bes_Bet_Level[VOL_TYPE] = RX1_Buffer[9] & 0x7F; //获取耳机电量
|
||
|
||
Bes_Chg_Full[VOL_TYPE] = RX1_Buffer[9] >> 7; //获取耳机是否满电
|
||
|
||
Vox_Pairing_State[VOL_TYPE] = RX1_Buffer[10]; //获取耳机配对状态；
|
||
|
||
Tws_Paired_Record[VOL_TYPE] = RX1_Buffer[11] & 0x01; //bit0:0：有TWS配对记录；1：没有TWS配对记录；bit1:0：有与手机配对记录；1：没有和手机配对记录。
|
||
|
||
Phone_Paired_Record[VOL_TYPE] = ( RX1_Buffer[11] >> 1 ) & 0x01;
|
||
|
||
Bes_OTA_State[VOL_TYPE] = RX1_Buffer[12];
|
||
}
|
||
else
|
||
{
|
||
Bes_Bet_Level[VOR_TYPE] = RX1_Buffer[9] & 0x7F;
|
||
|
||
Bes_Chg_Full[VOR_TYPE] = RX1_Buffer[9] >> 7;
|
||
|
||
Vox_Pairing_State[VOR_TYPE] = RX1_Buffer[10];
|
||
|
||
Tws_Paired_Record[VOR_TYPE] = RX1_Buffer[11] & 0x01;
|
||
|
||
Phone_Paired_Record[VOR_TYPE] = (RX1_Buffer[11] >> 1) & 0x01;
|
||
|
||
Bes_OTA_State[VOR_TYPE] = RX1_Buffer[12];
|
||
}
|
||
|
||
break;
|
||
|
||
case CMD_SN:
|
||
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Bes_Set_SN_State[VOL_TYPE] = RX1_Buffer[7]; //左耳机SN写入是否成功状态标志
|
||
}
|
||
else
|
||
{
|
||
Bes_Set_SN_State[VOR_TYPE] = RX1_Buffer[7]; //右耳机SN写入是否成功状态标志
|
||
}
|
||
|
||
break;
|
||
|
||
case CMD_GET_INTO_PAIR:
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Bes_In_Pair_State[VOL_TYPE] = RX1_Buffer[7]; //左耳机是否进入配对状态成功状态标志
|
||
}
|
||
else
|
||
{
|
||
Bes_In_Pair_State[VOR_TYPE] = RX1_Buffer[7]; //右耳机是否进入配对状态成功状态标志
|
||
}
|
||
|
||
break;
|
||
case CMD_PAIRING_IMD:
|
||
if( CMD_Type == TWS_VOL ) //根据耳机Side参数
|
||
{
|
||
Bes_In_Pair_State[VOL_TYPE] = 1; //左耳机是否进入配对状态成功状态标志
|
||
}
|
||
else
|
||
{
|
||
Bes_In_Pair_State[VOR_TYPE] = 1; //右耳机是否进入配对状态成功状态标志
|
||
}
|
||
|
||
break;
|
||
default:
|
||
break;
|
||
}
|
||
}
|
||
|
||
#endif
|
||
|
||
}
|
||
|
||
/*
|
||
*******************************************************************************
|
||
* void HandleVoxCommMsg(void)
|
||
*
|
||
* Description : Vox 通讯功能处理函数，100ms定时调用。由于和耳机通信前需要打开耳机端的TRX功能，并且每次通信只能一只耳机。通过切换VOL/VOR通信开关进行通信
|
||
*
|
||
* Arguments : NONE
|
||
|
||
* Returns : NONE
|
||
|
||
* Notes : NONE
|
||
*
|
||
*******************************************************************************
|
||
*/
|
||
|
||
void HandleVoxCommMsg(void)
|
||
{
|
||
uint8_t i = 0;
|
||
|
||
#if XUANHENG
|
||
|
||
uint16_t CrcCheckSum = 0;
|
||
|
||
uint16_t Data_Len = 0;
|
||
|
||
#else
|
||
|
||
uint8_t CrcCheckSum = 0;
|
||
|
||
#endif
|
||
/*RX数据处理*/
|
||
if( Uart1_RX_Finish_Flag )
|
||
{
|
||
Uart1_RX_Finish_Flag = FALSE;
|
||
|
||
#ifdef _DEBUG_VOX
|
||
printf("RX1_Buffer[0]:0x%x,RX1_Buffer[1]:0x%x,RX1_Buffer[2]:0x%x,RX1_Buffer[3]:0x%x,RX1_Buffer[4]:0x%x,RX1_Buffer[5]:0x%x,RX1_Buffer[6]:0x%x,line:%d\r\n",(u16)RX1_Buffer[0],(u16)RX1_Buffer[1],(u16)RX1_Buffer[2],(u16)RX1_Buffer[3],(u16)RX1_Buffer[4],(u16)RX1_Buffer[5],(u16)RX1_Buffer[6],(u16)__LINE__);
|
||
#endif
|
||
|
||
#if JIELI
|
||
|
||
CrcCheckSum = Crc8Maxim(RX1_Buffer, RX1_Buffer[2] + 3); //求校验和
|
||
|
||
if( CrcCheckSum == RX1_Buffer[RX1_Buffer[2] + 3] )
|
||
|
||
#elif ZHONGKE
|
||
|
||
CrcCheckSum = Crc8Maxim( RX1_Buffer, RX1_Buffer[4] + 5 );
|
||
|
||
if( CrcCheckSum == RX1_Buffer[ RX1_Buffer[4] + 5 ] )
|
||
|
||
#elif XUANHENG
|
||
|
||
Data_Len = RX1_Buffer[5] | ( RX1_Buffer[6] << 8 ) + 7;
|
||
|
||
CrcCheckSum = CalCheckCrc16( RX1_Buffer, Data_Len); //计算检验和
|
||
|
||
if( CrcCheckSum == (uint16_t)(RX1_Buffer[ Data_Len + 1 ] | RX1_Buffer[ Data_Len + 2 ] << 8) ) //校验和小端模式，低位在前。
|
||
|
||
#endif
|
||
{
|
||
#if XUANHENG
|
||
|
||
HandleRxMsg((VOX_BES_COMMAND_E)RX1_Buffer[2]);
|
||
|
||
#else
|
||
|
||
HandleRxMsg((VOX_BES_COMMAND_E)RX1_Buffer[3]);
|
||
|
||
#endif
|
||
}
|
||
else
|
||
{
|
||
return;
|
||
}
|
||
}
|
||
}
|
||
|
||
|
||
#endif
|