/*
 ******************************************************************************
 *
 * @file     UserApp.c
 * @brief    UserApp module
 *                 
 *
 * @version  1.0
 * @date     2023/03/27   15:00:40
 * @author   Alex Xu
 *
 * Copyright (c) 2013-2099,Tkplusemi Technology Co.,Ltd.
 * All Rights Reserved
 *
 * History:
 * Revision          Date           Author            Desc
 * 1.0.0            2023/03/27      Alex          build this file
 ******************************************************************************/
 /*_____ I N C L U D E S ____________________________________________________*/

#include "userapp.h"
#include "gpio.h"
#include "adc.h"
#include "hall.h"
#include "key.h"
#include "sleep.h"
#include "system.h"
#include "bat.h"
#include "sys_tim.h"
#include "charger_module.h"
#include "discharge_module.h"
#include "led.h"
#include "vox_module.h"

/******************************************************************************\
                          Macro definitions
\******************************************************************************/
#if DISPLAY_6PIN_188

#define LED_ON_CNT						10		//充满显示10s后熄灭
#define LED_BLINK_CNT					1	

#define LED_NUM_UNIT_CNT				1	
#define LED_COVER_CNT					5		//开关盖显示4s后熄灭

#define BATLEV_UPDATE_UINT_TIM_CHG 				30	

#define BATLEV_UPDATE_UINT_TIM_DISCHG 			60		
#endif

/******************************************************************************\
                             Variables definitions
\******************************************************************************/
uint8_t bat_level_update = 0xFF;

uint8_t LED_On_Timer = 0;			//led亮时间计时

#if DISPLAY_6PIN_188

uint8_t bat_level_Disp_Num = 0;

bit LED_188_Disp_Flg = 0;

uint8_t Disp_Vor_Lev = 0;
uint8_t Disp_Vol_Lev = 0;

uint8_t BatLev_Update_Uint_Cnt = 0;

#endif

/******************************************************************************\
                             Functions definitions
\******************************************************************************/
#if DISPLAY_6PIN_188

/*****************************************************************************
* Function		: void LED_Display_App(void)
* Description	: 5000ms调用周期					
* Input 		: None
* Output		: None
* Return		: None
* Note			: None
*****************************************************************************/
/*
灯效
数码管：
充电：显示百分百比电量，个位数闪烁
放电：左右耳对应的图标跑马，从下往上，盒子电量常亮（边充边放时，耳机图标和百分比要同时变化）。
开盖：显示充电盒百分比电量4S后灭掉。
关盖：有耳机充电则参考“放电灯效”；没耳机则显示百分百比电量4S后灭掉。

*/
bit Init_LED_Disp_Flag = 0;
bit CHG_LED_Disp_Flag = 0;
uint8_t BatLev_Update_Uint_Tim = 0;
bit Vor_GetInto_Box_Flag = 0;    //耳机入盒标志位
bit Vol_GetInto_Box_Flag = 0;

bit Vor_GetOut_Box_Flag = 0;    //耳机出盒标志位
bit Vol_GetOut_Box_Flag = 0;

bit Vor_GetOut_Box_Flag1 = 0;    //耳机出盒标志位
bit Vol_GetOut_Box_Flag1 = 0;

void LED_188Display_App(void)
{
	uint8_t i = 0;

	if (bat_level_update != bat_level)	   //电量发生变化，不能立刻变化，需要缓慢变化
	{
		if( !Init_LED_Disp_Flag )
		{	
			if( bat_level != 0 )
			{
				Init_LED_Disp_Flag = 1;
				g_188_Num = bat_level * 10;			
			}
		}
		else
		{
			bat_level_update = bat_level;
			bat_level_Disp_Num = 10 * bat_level;
		}	
	}			
	else
	{
		BatLev_Update_Uint_Cnt++;
		
		if( BatLev_Update_Uint_Cnt > BatLev_Update_Uint_Tim )
		{
			BatLev_Update_Uint_Cnt = 0;
			
			if ( CHIP_STA4 & 0x80 ) 									//充电中
			{					
				if( g_188_Num < (bat_level_Disp_Num + 9) )
				{
					g_188_Num += 1;
				}		
				
				BatLev_Update_Uint_Tim = BATLEV_UPDATE_UINT_TIM_CHG;						//充电30s更新一次电量个位数
			}
			else
			{
				if( ( Vor_Vout_Enable == ON ) || ( Vol_Vout_Enable == ON ) )				//有耳机充电，电量才减
				{
					if( g_188_Num > bat_level_Disp_Num )
					{
						g_188_Num -= 1;
					}
					
					BatLev_Update_Uint_Tim = BATLEV_UPDATE_UINT_TIM_DISCHG;					//放电60更新一次电量个位数
				}
			}
			
			if( g_188_Num > 100 )
			{
				g_188_Num = 100;
			}
		}
	}
	
#if NTC_ENABLE		
		/*NTC保护*/
		if( NTC_Pro_Flag )
		{
			if( !LED_188_Disp_Flg )
			{
				Set_NumLED_Down();
				LED_188_Disp_Flg = 1;
			}
			else
			{
				Display_Show_Num(g_188_Num);
				LED_188_Disp_Flg = 0;				
			}	
	
			return;
		}
#endif	

	if( Init_LED_Disp_Flag )	
	{
		if ( CHIP_STA4 & 0x80 )     								//充电中
		{	
			if ( Charger_Done ) 									// 充电完成，LED绿灯常亮
			{	
				if( LED_On_Timer < LED_ON_CNT )
				{
					LED_On_Timer++;
					g_188_Num = 100;
					Display_Show_Num(g_188_Num);
				}
				else
				{			
					Set_AllLed_Down();
				}
			}
			else 
			{
			#if 0
				if( LED_On_Timer < LED_NUM_UNIT_CNT )
				{
					LED_On_Timer++;
				}
				else
			#endif		
				{
				//	LED_On_Timer = 0;
					
					/*188数码管个位数闪烁显示。*/
					if( !LED_188_Disp_Flg )
					{
						for(i=13;i<20;i++)
						{
							Display_Ram_Tab[i] = 0;
						}
						
						LED_188_Disp_Flg = 1;
					}
					else
					{
						if(g_188_Num >= 99)						//未出现chg_done，则电量卡在99，各位数闪。
						{
							g_188_Num = 99;
						}
						
						Display_Show_Num(g_188_Num);
						LED_188_Disp_Flg = 0;				
					}	
				}
			}
			
			CHG_LED_Disp_Flag = 1;
		}
		else
		{	
			if ( Vol_GetInto_Box_Flag || Vor_GetInto_Box_Flag || CHG_LED_Disp_Flag )       	//耳机入盒，显示灯效
			{				
				if( ( Vor_Vout_Enable == OFF ) && ( Vol_Vout_Enable == OFF ) )				//盒子里没耳机则显示百分百比电量4S后灭掉
				{
					if( LED_On_Timer < LED_COVER_CNT )				
					{
						LED_On_Timer++;
						return;
					}
					Set_AllLed_Down();
					Vol_GetInto_Box_Flag = 0;
					Vor_GetInto_Box_Flag = 0;
					CHG_LED_Disp_Flag = 0;
				}
				else											//盒子里有耳机，则显示电量
				{
					Display_Show_Num(g_188_Num);
				}							
			}
			else
			{
				Set_AllLed_Down();
			}
		}	
#if 0
		if( Vor_GetOut_Box_Flag || Vol_GetOut_Box_Flag )
		{
		//	if( LED_On_Timer < LED_BLINK_CNT )				
			{
				//LED_On_Timer++;
				
				if( Vor_GetOut_Box_Flag )
				{			
					Vor_GetOut_Box_Flag = 0;
					Disp_Vor_Lev = Disp_Vol_Lev;
					//Disp_Vol_Lev = 1;
					Display_Show_Vor(0); 
				}
				
				if( Vol_GetOut_Box_Flag )
				{
					Vol_GetOut_Box_Flag = 0;
					Disp_Vol_Lev = Disp_Vor_Lev;
					//Disp_Vor_Lev = 1;
					Display_Show_Vol(0);
				}
									
			}
		}
#endif		
		/*放电：左右耳对应的图标跑马，从下往上，盒子电量常亮*/
		if( Vor_Vout_Enable == ON && !Vor_GetOut_Box_Flag )
		{
			Display_Show_Vor(Disp_Vor_Lev); 	
			Disp_Vor_Lev++;
			if(Disp_Vor_Lev > 4)
			{
				Disp_Vor_Lev = 1;
			}	
		}
		else
		{
			Display_Show_Vor(0); 
		}
		
		if( Vol_Vout_Enable == ON && !Vol_GetOut_Box_Flag )
		{
			Display_Show_Vol(Disp_Vol_Lev);
			Disp_Vol_Lev++;
			if(Disp_Vol_Lev > 4)
			{
				Disp_Vol_Lev = 1;
			}
		}
		else
		{
			Display_Show_Vol(0);
		}	
	}
}

#endif

/*****************************************************************************
* Function		: UserAPP
* Description	: 5ms调用周期 					
* Input			: None
* Output		: None
* Return		: None
* Note			: None
*****************************************************************************/
void UserAPP(void)
{

#ifdef LED_DISPLAY	

	if(F_sys_tim_10ms)
	{
		F_sys_tim_10ms = 0;	
		LED_Drv();
	}
	
#endif

	if(F_sys_tim_100ms)
	{
		F_sys_tim_100ms = 0;
		
#if HALL_ENABLE			
		Hall_Handler(); 		//开关盖检测	
#endif
	
#if DISCHARGE_ENABLE
		DisCharge_Handler();			//放电boost功能
#endif		

#if KEY_ENABLE
		Key_Handler();				//按键检测	
#endif
	
#if CHARGER_ENABLE	
		Charger_Handler();			//充电功能
#endif	

#if ADC_ENABLE
		Vbat_Adc = Vbat_Value();			//获取Bat电压	
#endif		

#if BAT_VALUE
		check_bat_level();
#endif

#if VOX_ENABLE

		Vol_Det_Machine();
		Vor_Det_Machine();		
	
#endif	

	}
	
#if 0	

	if( F_sys_tim_500ms )
	{
		F_sys_tim_500ms = 0;
	
		LED_188Display_App();			//LED 灯效	
	}
	
#endif		

	if( F_sys_tim_1s )
	{
		F_sys_tim_1s = 0;
#if DISPLAY_6PIN_188

		LED_188Display_App();			//LED 灯效	
#endif
#if SLEEP_ENABLE	

		/*1、唤醒后工作Ns后进入Sleep Mode,N需要大于100ms。
		  2、有VIN存在的情况下，系不会进入sleep mode。
		*/

        if( Decnt_SleepDelay > 0 )    /*能否在数字中实现此功能？*/
        {            							
            Decnt_SleepDelay--;

			/*倒数进Sleep Mode过程中出现了KEY\HALL\Loadon\IOFF中断，则重新计时。*/
			if( Enter_Sleep_Cnt_Restart_Flag )
			{
				Enter_Sleep_Cnt_Restart_Flag = 0;
				Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
			}
			
#ifdef _DEBUG_MAIN
			printf("sleep decnt:%d,STA0:0x%x,STA1:0x%x,STA2:0x%x,STA4:0x%x\r\n", (uint16_t)Decnt_SleepDelay,(uint16_t)CHIP_STA0,(uint16_t)CHIP_STA1,(uint16_t)CHIP_STA2,(uint16_t)CHIP_STA4);
#endif					
			return;
        }	
		
		if( Check_Require_Sleep() )
		{						
			/* Enter Sleep */

			SFRADDR = WKUP_EN3; 					//vox loadon wake up enable
			SFRDATA |= 0x3C;			

			/* InSleep Handler */		//Disable All IRQ		
#if TIMER1_ENABLE			
			ET1 = 0;		//timer1 IRQ Disable
#endif				

#if UART0_ENABLE			
			ES0 = 0;		//UART0 IRQ Disable
#endif
			EX4 = 0;
			EX2 = 0;
			ET0 = 0;		//timer0 IRQ Disable		
			COM_CTRL = OFF;			//进休眠关闭VOUT输出
			VOX_CTL0 &= ~0x30;    //VOX 5v Off 
			
#if DISCHARGE_ENABLE
			BST_EN = 0; 	 //Boost Disable   
#endif
			SFRADDR = ADC_CTL0; 
			SFRDATA &= ~0x80;			//ADC Disable.		
			
#if DISPLAY_6PIN_188	

			SFRADDR = P0_OE;
			SFRDATA &= 0xC0;
			
			SFRADDR = P0_IE;
			SFRDATA &= 0xC0;
					
#endif
			SFRADDR = PMU_CTL0;					//芯片硬件需求，固定
			SFRDATA &= ~0x30;

			PCON |= 0x02;						//Enter StandbyMode, Only int0 or int1 can wake up system

			SFRADDR = PMU_CTL0;   			//芯片硬件需求，固定
			SFRDATA |= 0x30;			
			/* OutSleep Handler */		//Enable IRQ
#if UART0_ENABLE			
			ES0 = 1;		//UART0 IRQ 
#endif
			EX4 = 1;
			EX2 = 1;
			ET0 = 1;		//timer0 IRQ
#if TIMER1_ENABLE			
			ET1 = 1;		//timer1 IRQ
#endif	

			Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
		}
		else
		{
			Decnt_SleepDelay = ENTER_STANDBYMODE_CNT;
		}
		
#endif
	}
}